 | | |||||||
|  |
 | > |
| Everything Else Use this forum to talk about Pentax-related topics not covered in other sections, or if you are unsure where else to post. |
 |
| | Thread Tools | Search this Thread | Display Modes |
| 08-01-2008, 04:20 PM | #16 |
| Pentaxian | Originally Posted by Duplo The camera switches it off anyway. Have you ever noticed any ill effects of leaving SR on while using a tripod? I recall some tested this and noticed nothing wrong at all.
On the other hand I have accidentally turned SR off for an entire session where it was critical.  |
|
| 08-01-2008, 06:06 PM | #17 |
| Moderator Site Supporter | Originally Posted by rparmar I don't think that's totally correct. If you set the camera for 2 second MLU, then the SR turns off automatically. But just leaving the function to single or burst shooting and putting it on a tripod, SR is still active. I've tried this a couple of times and the shot looks soft when SR is on and the camera is on a tripod. Switch it off and the same shot is sharper. It's in the manual somewhere.
|
|
|
| 08-01-2008, 06:48 PM | #18 |
| Pentaxian | Originally Posted by Peter Zack OK, that clarifies it. I think I always use MLU when on a tripod. So maybe for me it hasn't been an issue. But something to watch.
|
|
|
| 08-02-2008, 07:11 PM | #19 |
| Pentaxian | Originally Posted by rparmar Well so did I most of the times, but sometimes it makes timing a little difficult if you use the 2 second delay.
|
|
|
|
« Previous Thread
|
Next Thread »
| Thread Tools | Search this Thread |
| Display Modes | |
Linear Mode
| |
All times are GMT -7. The time now is 12:31 AM.