Latest Review Posted | Yongnuo RF-603 II I bought a pair of RF-603N II w/ C1 cable and I see they are fully functional with my K5-II and AF-540 FGZ.
Ask your seller for a C1 cable (jack 2,5mm on both ends), not N1 or N3, because that's needed for shutter release on a Pentax camera.
You can use 2 triggers in different ways, always turn on your flash in "A" mode (not "M" mode as written in the trigger's manual)
A)
- first trigger in TX mode on hot shoe of the Pentax camera
- second trigger on flash in TRX mode
- no cable C1 needed
this configuration triggers the flash when you press the shutter button on camera
B)
- first trigger in TRX mode on hot shoe of the Pentax camera
- second trigger on flash in TRX mode
- cable C1 connected to socket of the Pentax camera
this configuration triggers the flash when you press the shutter release button on camera; when you half-press one trigger's main button you act AF on the camera; when you full-press one trigger's main button you get the shutter release on the camera and flash lamp, this means you can take a shot by hand-holding your flash remotely from camera.
C) using Pentax wireless remote control shutter release
- first trigger in TRX mode on hot shoe of the Pentax camera
- second trigger on flash in TRX mode
- cable C1 connected to socket of the Pentax camera
- on Camera select wireless remote control (shutter release, not flash), delay 3s or multi-shot
this configuration triggers the flash also when you press the shutter relea... |