Pentax K-1 II Firmware v1.05 Released
Optimizes support for the new D FA* 85mm lens
By PF Staff in Firmware Updates on Jun 21, 2020
Ricoh Imaging has just released a new firmware update for the Pentax K-1 Mark II. This update optimizes support for the new DA* 85mm F1.4 lens, which is due to start shipping in early July.
In addition, the update includes the usual minor stability fixes and as always, the contents of all previously-released updates.
Download the K-1 Mark II firmware from the official Pentax firmware site.
Learn more about the Pentax K-1 II in our in-depth review.
Official Release Notes - K-1 II Firmware v1.05
Pentax K-1 II Firmware Update Instructions:
- Download the firmware ZIP file from this page
- Extract the file to a folder of your choosing
- Locate the extracted .BIN file and copy it to the root (top level i.e. outside of any folder) of a formatted SD card
- Fully charge your battery (firmware will not update at fewer than 3 bars)
- Insert the card into your camera's SD1 slot
- Turn the camera power on while pressing the MENU button
- Select "Yes"at the firmware prompt
- Once the screen displays "Complete", turn off your camera
- Power your camera back on and resume normal use
- In order to verify that the firmware update was successful, go to the firmware option under the setup (wrench icon) menu tab, and confirm that the indicated firmware version matches that of the update.
Note that all updates are cumulative, so the latest firmware version includes the contents of all previous versions.
If you've having trouble updating your camera, check the points below. In nearly all cases, your issue is covered by one of these:
- Ensure you downloaded the correct firmware file for your camera (a K-3 II update will not work in a Pentax K-3, for example)
- Ensure that you extracted the .BIN file out of the ZIP (the .BIN file is the only thing that the camera wants)
- Check that the .BIN file is in the top level (root directory) of the SD card, outside of the DCIM folder
- Delete old update files prior to copying a new update over to your card
- Ensure that the .BIN file has not been renamed and that extension is unchanged (operating systems can do one or both if there are naming conflicts)
- Check that your battery is fully charged
- If your camera has two SD slots, the card with the update must be placed in SD1
Firmware Update Tutorial Video
More from the Pentax Forums Homepage
- Savings on Topaz Gigapixel AI from Topaz Labs
- Ricoh announces new WG-80 point and shoot camera
- Pentax K-3 Mark III Continuous Autofocus...
- April "Urban Landscape" Contest...
- U.S. Pentax Deal Roundup: May 12, 2022
- Win a SMC Pentax DA 21mm: Special Photo Contest
- Ricoh WG-6 Firmware Update Adds Webcam...
- U.S. Pentax Deal Roundup: May 3, 2022