I made the file and saved to an empty SD card and installed in my K7. I held down menu and turned on and saw the following: Pentax K7; DSP Ver1.12.22.28 ; CPU Ver 1.12.22.28. The screen flashes PC DEBUG and PC VENDOR but does not stop on PC DEBUG.
If everything OK, it will show you all options avaible on Debug mode :
IT SHOWS NOTHING ON DEBUG MODE
Beware to not change a thing you do not need ( once again, all this are made at your own risk)
Use the pad to go to the line
?use what pad?
LENS ROM CAMERA=>SD
I think the instructions could be clearer! Please help!
Make a saved file of the EEPROM to allow you to reverse the process in cas of troubles
{{STEP 3}}
To modify the EEPROM, you can
-Either access the LENSEEP.LNS file you create by saving the file, I ask you to use Notepad++
Notepad++ Home
-Or go to the line :
LENS EEPROM READ/WRITE
You can change the code line by line
Using NOTEPAD++ : DO NOT FORGET TO SAVE A FILE AND MODIFY A COPY FOR YOUR OWN SECURITY