Originally posted by lewvanbommel Sorry to hijack, but has anyone found triggers that work with the shanny? I’ve tried two different ebay variants with no luck.
I used Cactus V6 II triggers to fire the Shanny in HSS (Shanny must be set to PTTL to get HSS). One trigger in TX mode on the hotshoe and one in RX mode under the Shanny, both set to same channel and group. Worked like a champ. Also did a quick test using the V6 version trigger (no support for HSS with the V6) and worked to fire the Shanny in standard sync mode. Getting the correct firmware version possibly key to desired result. Version that allows V6 II to support X-TTL does not talk to V6 if trying to use both for standard sync. So, have not tried to create a TTL group using the V6 II and the Shanny. Also, with the firmware version I used, I had no apparent power control over the Shanny from the TX unit - adjusted manually. Not sure that would change with any firmware though. Cactus RF60X units did remote adjust using the TX unit, so were mounted in the softbox. The Cactus troubleshooting pages are invaluable to sus out the issues and see if there are solutions before making the jump. So far, so good for my purposes.