Originally posted by morenjavi Thanks a lot for your inputs. Do you control other flashes with your V1 ? If so ...
Is it easy to control, enable/disable groups from the V1 ?
Do you have other old Godox flashes with XT16 receivers ? Can you control it from the V1 without issue ?
Thanks!
Matt will no doubt test it but I would assume it's identical to the R2-integration in the Godox V350 flash (Flashpoint Zoom-Mini TTL) which has worked perfectly. I use that as the trigger for one of my cameras while the other has a traditional Godox (Adorama) R2 trigger. Using both at once allows either camera to control my AD200's. As an example I'll sometimes have a *55 or FA77 on one
camera and the 50-135 on the other. A lot faster than lens changes and a lot less dust intrusion. Just be sure to use the correct "multi" setting on the R2. It won't work otherwise.
One thing to note is using both the V350, and I will assume the V1, at the same time as the R2 will drain the trigger's battery much quicker than normal. Sync signals get sent every time the AD200's are fired which isn't normally the case. Carry an extra set of batteries if you chose to do that.