M&R Optics 3D printed accessories for Pentax Q series cameras

2old4toys · 07-02-2019, 10:51 PM - **2 Likes**

https://make.dmm.com/item/897159/

The base of this extended grip and spare battery compartment looks to have all the right lumps for a good contoured fit. I like the big wheel for easy attachment/detachment. The spare battery slot is cool too.

The Q-S1 grip bump by the same user is seamless! Makes it look like an official evolution of the Q-S1. I could not even recognise the Q-S1 at 1st glance.

https://mobile.twitter.com/search?q=%23mr_optics%20%23pentaxqs1&src=typed_query/

Last edited by 2old4toys; 07-03-2019 at 12:33 AM.

**csa** · 07-03-2019, 08:15 AM

Nice! Now if a lcd shade could be made that was not as large or larger of the Q!

**PJ1** · 07-03-2019, 02:59 PM - **1 Like**

Originally posted by csa

Now if a lcd shade could be made that was not as large or larger of the Q!

Hi Carol. I got these for my Q7 and Q10. They are OK. The pop-up part slides up is it is not needed (only problem being that if it slides off without being noticed you could lose it).

http://www.jjc.cc/index.php/Product/product_info/id/694

They are on ebay. Only issue I found is to make sure the part that sticks to the camera body does not foul the battery compartment door.

**csa** · 07-03-2019, 05:32 PM

Thank you! I just didn't want something big & bulky, so this might be the thing for me!

2old4toys · 08-06-2019, 05:50 PM - **2 Likes**

NEW Integrated variable aperture 3D printed adaptor prototype for Pentax 110 lenses.

https://mobile.twitter.com/kanade_snowlit/status/1157588710247919616

**PJ1** · 08-06-2019, 08:22 PM - **1 Like**

Originally posted by 2old4toys

Integrated variable aperture 3D printed adaptor prototype for Pentax 110 lenses.

I like that!!

2old4toys · 08-07-2019, 04:05 AM - **2 Likes**

3D printed grip with IR shutter release and magnifying viewfinder contraption for the Q-S1 This is 2019!
https://mobile.twitter.com/st00dw00d/status/1158008831835697153

2old4toys · 06-22-2020, 10:57 PM

Originally posted by 2old4toys

3D printed grip with IR shutter release and magnifying viewfinder contraption for the Q-S1 This is 2019!
Twitter

2020 it is evolving!

---------- Post added 06-22-20 at 11:12 PM ----------

Use Pentax Q mount lenses in your raspberry pi camera?!

Twitter

2old4toys · 06-30-2020, 03:54 AM - **1 Like**

So this prototype uses a modern 12MP sensor same size as the Q7 & Q-S1, can take Pentax Q lenses (those without leaf shutter) but will have a tilt hi res back screen.

Interesting 🤔

**barondla** · 07-07-2020, 09:40 AM

Originally posted by 2old4toys

So this prototype uses a modern 12MP sensor same size as the Q7 & Q-S1, can take Pentax Q lenses (those without leaf shutter) but will have a tilt hi res back screen.

Interesting 🤔

This is neat. With no compatibility with shuttered Q lenses this would only work with Toy (including FE) and adapted lenses. Hi res screen isn't very important for Toy lenses. So this is an adapted lens ultra telephoto rig? That could be useful.

Thanks for sharing,
barondla

07-02-2019, 10:51 PM - 2 Likes	#1
2old4toys Pentaxian Join Date: Jan 2018 Posts: 301	M&R Optics 3D printed accessories for Pentax Q series cameras https://make.dmm.com/item/897159/ The base of this extended grip and spare battery compartment looks to have all the right lumps for a good contoured fit. I like the big wheel for easy attachment/detachment. The spare battery slot is cool too. The Q-S1 grip bump by the same user is seamless! Makes it look like an official evolution of the Q-S1. I could not even recognise the Q-S1 at 1st glance. https://mobile.twitter.com/search?q=%23mr_optics%20%23pentaxqs1&src=typed_query/ Last edited by 2old4toys; 07-03-2019 at 12:33 AM.

08-07-2019, 04:05 AM - 2 Likes	#7
2old4toys Pentaxian Join Date: Jan 2018 Posts: 301 Original Poster	3D printed grip with IR shutter release and magnifying viewfinder contraption for the Q-S1 This is 2019! https://mobile.twitter.com/st00dw00d/status/1158008831835697153 Last edited by 2old4toys; 08-07-2019 at 04:22 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hähnel PROCUBE2 - 3D printed adapter for Pentax D-Li90	angerdan	Pentax Camera and Field Accessories	18	11-05-2020 12:15 PM
AF201 3D Printed Accessories	Bob 256	Pentax Camera and Field Accessories	5	06-08-2019 01:26 PM
3d printed adaptors?	2old4toys	Pentax Q	10	04-03-2018 04:21 AM
Remember the 3D printed Q lens focus lock?	barondla	Pentax Q	5	03-08-2016 09:20 PM
The Pentax Q 3D printed extension tube project.	barondla	Pentax Q	23	05-11-2014 09:06 AM

07-03-2019, 08:15 AM	#2
csa Loyal Site Supporter Join Date: Aug 2014 Location: Montana mountains Posts: 9,810	Nice! Now if a lcd shade could be made that was not as large or larger of the Q!

07-03-2019, 02:59 PM - 1 Like	#3
PJ1 Site Supporter Join Date: Jul 2012 Location: Mosquito Creek, Australia Photos: Gallery \| Albums Posts: 4,497	Originally posted by csa Now if a lcd shade could be made that was not as large or larger of the Q! Hi Carol. I got these for my Q7 and Q10. They are OK. The pop-up part slides up is it is not needed (only problem being that if it slides off without being noticed you could lose it). http://www.jjc.cc/index.php/Product/product_info/id/694 They are on ebay. Only issue I found is to make sure the part that sticks to the camera body does not foul the battery compartment door.

07-03-2019, 05:32 PM	#4
csa Loyal Site Supporter Join Date: Aug 2014 Location: Montana mountains Posts: 9,810	Thank you! I just didn't want something big & bulky, so this might be the thing for me!

08-06-2019, 05:50 PM - 2 Likes	#5
2old4toys Pentaxian Join Date: Jan 2018 Posts: 301 Original Poster	NEW Integrated variable aperture 3D printed adaptor prototype for Pentax 110 lenses. https://mobile.twitter.com/kanade_snowlit/status/1157588710247919616

08-06-2019, 08:22 PM - 1 Like	#6
PJ1 Site Supporter Join Date: Jul 2012 Location: Mosquito Creek, Australia Photos: Gallery \| Albums Posts: 4,497	Originally posted by 2old4toys Integrated variable aperture 3D printed adaptor prototype for Pentax 110 lenses. I like that!!

06-22-2020, 10:57 PM	#8
2old4toys Pentaxian Join Date: Jan 2018 Posts: 301 Original Poster	Originally posted by 2old4toys 3D printed grip with IR shutter release and magnifying viewfinder contraption for the Q-S1 This is 2019! Twitter 2020 it is evolving! ---------- Post added 06-22-20 at 11:12 PM ---------- Use Pentax Q mount lenses in your raspberry pi camera?! Twitter

06-30-2020, 03:54 AM - 1 Like	#9
2old4toys Pentaxian Join Date: Jan 2018 Posts: 301 Original Poster	So this prototype uses a modern 12MP sensor same size as the Q7 & Q-S1, can take Pentax Q lenses (those without leaf shutter) but will have a tilt hi res back screen. Interesting 🤔

07-07-2020, 09:40 AM	#10
barondla Site Supporter Join Date: Sep 2006 Location: midwest, United States Photos: Gallery \| Albums Posts: 4,993	Originally posted by 2old4toys So this prototype uses a modern 12MP sensor same size as the Q7 & Q-S1, can take Pentax Q lenses (those without leaf shutter) but will have a tilt hi res back screen. Interesting 🤔 This is neat. With no compatibility with shuttered Q lenses this would only work with Toy (including FE) and adapted lenses. Hi res screen isn't very important for Toy lenses. So this is an adapted lens ultra telephoto rig? That could be useful. Thanks for sharing, barondla

Thread Tools	Search this Thread
	Search this Thread: Advanced Search