Originally posted by stevebrot Cool! Do we know the purpose of this assembly? It looks more like the mirror flipper than the aperture actuator.
Steve
I found the description of how this assembly works, the problem is how to translate it. The guy uses some physics jargon which I hardly understand in Russian
He says the following: "Описать действие узла я могу следующим образом:
В исходном состоянии рычаг управления диафрагмой притянут якорем в верхнем положении за счет поля постоянного магнита.
По приходу импульса на катушки эл.магнита создается магнитное поле, противодействующее полю постоянного магнита, вследствие чего
общая напряженность магнитного поля становится близкой к нулю.
Под действием пружины (рычаг управления диафрагмой подпружинен, и стремится вытащить якорь из каркаса катушек)
рычаг управления диафрагмой вместе с якорем уходит вниз и творит свое доброе дело. (не видно).
Начинают вращатся шестерни, которые после окончания импульса, через некоторое время возвращают рычаг с якорем в исходное состояние каким то толкателем.
Толкатель на шестерне проворачивается дальше и освобождает рычаг для следующего хода, шестерни останавливаются в исходном положении.
Рычаг с якорем удерживается магнитным полем постоянного магита и опять стремится выдернуть якорь и так по новой."
"I can describe the way this assembly works in the following manner. Initially, the arm that moves the aperture is held in the upper position by the electromagnetic field created by the magnet. Once the electric impulse reaches the coil, an electromagnetic field opposite to the current of the magnet is generated, the result of which is that the total electromagnetic field strength is close to zero. The arm that moves the aperture is spring loaded, which pulls it down to open the aperture. The cogs start spinning and when the electric impulse is gone, they return the arm that drives aperture into the initial position using a pin. The pin on the cog moves further and frees the arm that drives the aperture for the next actuation. The cogs return to the initial position and the arm that drives the aperture as well as the armature are held by the electromagnetic field generated by the magnet."
Sorry - haven't done physics in 20 years or so