New Firmware Released

**Cerebum** · 04-19-2021, 04:36 PM

Originally posted by rogerstg

AF fine adjustment didn't change on my KP, but I'll probably check if any lenses need their AF tuning adjusted.

---------- Post added 04-19-21 at 02:33 PM ----------

The Dot Tune method is pretty quick.

Dot tune. Brilliant. I will give it a go. Thanks

Flying633 · 04-20-2021, 04:59 AM

I’ve never updated firmware on my K3 Mk1. What am I missing out on?

Wheatfield · 04-20-2021, 07:34 AM

Originally posted by Jeff

i had the same reaction! Just checked my K-1 and the fine adjustment of -9 for the fat 50 is still there. Phew..!

But is it correct? I haven't done all my AF lenses yet, but the D FA*85/1.4 needed to be readjusted by enough that I doubt very much it was misadjusted when I dialed it in after buying it.

Jeff · 04-20-2021, 09:55 AM

Originally posted by Wheatfield

But is it correct? I haven't done all my AF lenses yet, but the D FA*85/1.4 needed to be readjusted by enough that I doubt very much it was misadjusted when I dialed it in after buying it.

I had a quick check last night and it seemed okay. But now doubt has crept in. I'll have to check carefully when I have some time on the weekend. Thanks for the message, even if it brought some disquiet to my even temperament!

Wheatfield · 04-20-2021, 10:00 AM

Originally posted by Jeff

I had a quick check last night and it seemed okay. But now doubt has crept in. I'll have to check carefully when I have some time on the weekend. Thanks for the message, even if it brought some disquiet to my even temperament!

These are the things that are sent to vex us. I only noticed with my 85 because when I pulled it out yesterday, it seemed off by a hair (literally). Now I have to set up a test bench and check all my AF lenses.
I'd rather watch peas boil in a pot.

bxf · 04-20-2021, 10:14 AM - **1 Like**

Originally posted by Wheatfield

...I'd rather watch peas boil in a pot.

I gather you're talking from experience...

**robbiec** · 04-20-2021, 10:40 AM

Originally posted by bxf

I gather you're talking from experience...

I think he has a lot of peas in his pod.

**i_trax** · 04-20-2021, 10:49 AM

Originally posted by Wheatfield

These are the things that are sent to vex us. I only noticed with my 85 because when I pulled it out yesterday, it seemed off by a hair (literally). Now I have to set up a test bench and check all my AF lenses.
I'd rather watch peas boil in a pot.

yep , the aroma would be irresistible......

stevebrot · 04-20-2021, 12:15 PM - **1 Like**

Originally posted by Flying633

I’ve never updated firmware on my K3 Mk1. What am I missing out on?

You are missing out on several important/useful features; for example, timed exposures up to 20 minutes, night mode, and Image Transmitter 2 support. The full list of features and download link are at...

Latest PENTAX K-1 Firmware Update : Software Downloads | RICOH IMAGING

Note that there are user manual supplement PDF links in the descriptions for v1.30 and v1.40 that are helpful in determining how to use the features.

Steve

texandrews · 04-20-2021, 01:25 PM

Originally posted by stevebrot

....and Image Transmitter 2 support.

And wouldn't it be sooooo nice if we could buy that today from Ricoh or a non-sketchy dealer! Sheesh!

stevebrot · 04-20-2021, 02:41 PM

Originally posted by texandrews

And wouldn't it be sooooo nice if we could buy that today from Ricoh or a non-sketchy dealer! Sheesh!

You can order from B&H for $249.79 USD...

https://www.bhphotovideo.com/c/product/888259-REG/Pentax_39030_Image_Transmi...981&

I know...where did that come from? I guess because the K-3iii has been added to the compatible camera list.

Steve

robjmitchell · 04-20-2021, 02:46 PM

It seems I need a bigger memory card for my K3. Is there SD cards I cannot use?

stevebrot · 04-20-2021, 03:14 PM - **1 Like**

Originally posted by robjmitchell

It seems I need a bigger memory card for my K3. Is there SD cards I cannot use?

A 32MB card, empty except for the fwdc220b.bin file in the card root directory should work.

Steve

jeallen01 · 04-20-2021, 03:33 PM

Originally posted by stevebrot

A 32MB card, empty except for the fwdc220b.bin file in the card root directory should work.

Steve

FWIW, I updated the K-70 but then forgot to reformat the SD card - then took quite a few shots in the garden without any (obvious?) issues.Therefore I don't think that it is "absolutely necessary" to do that, but maybe simply delete the .bin file "as and when".

bxf · 04-20-2021, 03:53 PM

Originally posted by jeallen01

FWIW, I updated the K-70 but then forgot to reformat the SD card - then took quite a few shots in the garden without any (obvious?) issues.Therefore I don't think that it is "absolutely necessary" to do that, but maybe simply delete the .bin file "as and when".

Nothing special happens because you're not pressing the MENU button while turning on the camera, which is the required action to start the firmware update.

04-20-2021, 12:15 PM - 1 Like	#159
stevebrot Otis Memorial Pentaxian Join Date: Mar 2007 Location: Vancouver (USA) Photos: Gallery \| Albums Posts: 42,007	Originally posted by Flying633 I’ve never updated firmware on my K3 Mk1. What am I missing out on? You are missing out on several important/useful features; for example, timed exposures up to 20 minutes, night mode, and Image Transmitter 2 support. The full list of features and download link are at... Latest PENTAX K-1 Firmware Update : Software Downloads \| RICOH IMAGING Note that there are user manual supplement PDF links in the descriptions for v1.30 and v1.40 that are helpful in determining how to use the features. Steve

04-20-2021, 02:41 PM	#161
stevebrot Otis Memorial Pentaxian Join Date: Mar 2007 Location: Vancouver (USA) Photos: Gallery \| Albums Posts: 42,007	Originally posted by texandrews And wouldn't it be sooooo nice if we could buy that today from Ricoh or a non-sketchy dealer! Sheesh! You can order from B&H for $249.79 USD... https://www.bhphotovideo.com/c/product/888259-REG/Pentax_39030_Image_Transmi...981& I know...where did that come from? I guess because the K-3iii has been added to the compatible camera list. Steve Last edited by stevebrot; 04-20-2021 at 02:52 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ricoh GR III Firmware v1.41 Released	kvoz123	Ricoh GR	15	04-28-2021 03:20 AM
Pentax K-1 Firmware v1.53 Released	PF Staff	Homepage & Official Pentax News	4	06-21-2020 09:44 PM
New firmware 1.10 for K-1 released	funktionsfrei	Pentax K-1 & K-1 II	2	05-19-2016 10:55 AM
New NEX Firmware released 7, 6, 5R, 5N, F3	nosnoop	Canon, Nikon, Sony, and Other Camera Brands	3	02-06-2013 11:29 AM
New K-5 firmware to be released ?	Xatnep_CJ	Pentax K-r	2	01-05-2011 11:02 AM

04-19-2021, 04:36 PM	#151
Cerebum Site Supporter Join Date: Oct 2017 Location: Lancaster Photos: Gallery Posts: 3,828	Originally posted by rogerstg AF fine adjustment didn't change on my KP, but I'll probably check if any lenses need their AF tuning adjusted. ---------- Post added 04-19-21 at 02:33 PM ---------- The Dot Tune method is pretty quick. Dot tune. Brilliant. I will give it a go. Thanks

04-20-2021, 04:59 AM	#152
Flying633 New Member Join Date: Aug 2017 Posts: 21	I’ve never updated firmware on my K3 Mk1. What am I missing out on?

04-20-2021, 07:34 AM	#153
Wheatfield Moderator Join Date: Apr 2008 Location: The wheatfields of Canada Posts: 15,981	Originally posted by Jeff i had the same reaction! Just checked my K-1 and the fine adjustment of -9 for the fat 50 is still there. Phew..! But is it correct? I haven't done all my AF lenses yet, but the D FA*85/1.4 needed to be readjusted by enough that I doubt very much it was misadjusted when I dialed it in after buying it.

04-20-2021, 09:55 AM	#154
Jeff Pentaxian Join Date: Apr 2015 Location: Berkshire, England Posts: 837	Originally posted by Wheatfield But is it correct? I haven't done all my AF lenses yet, but the D FA*85/1.4 needed to be readjusted by enough that I doubt very much it was misadjusted when I dialed it in after buying it. I had a quick check last night and it seemed okay. But now doubt has crept in. I'll have to check carefully when I have some time on the weekend. Thanks for the message, even if it brought some disquiet to my even temperament!

04-20-2021, 10:00 AM	#155
Wheatfield Moderator Join Date: Apr 2008 Location: The wheatfields of Canada Posts: 15,981	Originally posted by Jeff I had a quick check last night and it seemed okay. But now doubt has crept in. I'll have to check carefully when I have some time on the weekend. Thanks for the message, even if it brought some disquiet to my even temperament! These are the things that are sent to vex us. I only noticed with my 85 because when I pulled it out yesterday, it seemed off by a hair (literally). Now I have to set up a test bench and check all my AF lenses. I'd rather watch peas boil in a pot.

04-20-2021, 10:14 AM - 1 Like	#156
bxf Veteran Member Join Date: Jul 2010 Location: Lisbon area Posts: 1,660	Originally posted by Wheatfield ...I'd rather watch peas boil in a pot. I gather you're talking from experience...

04-20-2021, 10:40 AM	#157
robbiec Site Supporter Join Date: Feb 2009 Location: Cork Photos: Albums Posts: 1,882	Originally posted by bxf I gather you're talking from experience... I think he has a lot of peas in his pod.

04-20-2021, 10:49 AM	#158
i_trax Loyal Site Supporter Join Date: Jan 2011 Location: Perth Western Australia Photos: Gallery \| Albums Posts: 2,621	Originally posted by Wheatfield These are the things that are sent to vex us. I only noticed with my 85 because when I pulled it out yesterday, it seemed off by a hair (literally). Now I have to set up a test bench and check all my AF lenses. I'd rather watch peas boil in a pot. yep , the aroma would be irresistible......

04-20-2021, 01:25 PM	#160
texandrews Moderator Join Date: Apr 2014 Location: Baltimore Photos: Albums Posts: 3,390	Originally posted by stevebrot ....and Image Transmitter 2 support. And wouldn't it be sooooo nice if we could buy that today from Ricoh or a non-sketchy dealer! Sheesh!

04-20-2021, 02:46 PM	#162
robjmitchell Veteran Member Join Date: Oct 2007 Location: Melbourne Aus Posts: 1,776	It seems I need a bigger memory card for my K3. Is there SD cards I cannot use?

Thread Tools	Search this Thread
	Search this Thread: Advanced Search

04-20-2021, 03:14 PM - 1 Like	#163
stevebrot Otis Memorial Pentaxian Join Date: Mar 2007 Location: Vancouver (USA) Photos: Gallery \| Albums Posts: 42,007	Originally posted by robjmitchell It seems I need a bigger memory card for my K3. Is there SD cards I cannot use? A 32MB card, empty except for the fwdc220b.bin file in the card root directory should work. Steve

04-20-2021, 03:33 PM	#164
jeallen01 Pentaxian Join Date: May 2008 Location: London, UK Posts: 1,697	Originally posted by stevebrot A 32MB card, empty except for the fwdc220b.bin file in the card root directory should work. Steve FWIW, I updated the K-70 but then forgot to reformat the SD card - then took quite a few shots in the garden without any (obvious?) issues.Therefore I don't think that it is "absolutely necessary" to do that, but maybe simply delete the .bin file "as and when".

04-20-2021, 03:53 PM	#165
bxf Veteran Member Join Date: Jul 2010 Location: Lisbon area Posts: 1,660	Originally posted by jeallen01 FWIW, I updated the K-70 but then forgot to reformat the SD card - then took quite a few shots in the garden without any (obvious?) issues.Therefore I don't think that it is "absolutely necessary" to do that, but maybe simply delete the .bin file "as and when". Nothing special happens because you're not pressing the MENU button while turning on the camera, which is the required action to start the firmware update.