Hello,
I've been searching the web and the forums for any hint at what might be causing my problem, and I've think I've replaced everything I can to rule out a hardware issues. I've attached an image here so there isn't any question about what I'm seeing. As a few of you have experienced this. So here's what I've done over the past 2 years to address this:
1. Laptop and harddrives have been replaced - I upgraded the system so this was an easy swap. Currently I'm using a 1TB SSD drive to store my images. The drive is in Slot 2 of the laptop. NOT connected via USB.
2. I've used several different types of SD CARD readers from usb 2.0, usb 3.0 to USB C reader to import the images.
3. To rule out a LR import issue, I've copied the files manually to a HD source before import. The images are bad on the SD Card
3. Swapped out cables like there was no tomorrow.
4. Purchased different SD cards (great way to justifying my larger cards)
5. Tested different Import methods: Import from SD Card via Lightning reader to LR on my IPAD Pro, Multiple SDCARD readers to Laptop Windows LR. Either way, I find corrupt images.
6. No difference writing to Slot 1 or Slot 2 in the camera.
What I haven't tried:
A. Setup camera to write to SLOT 1 and SLOT 2 simultaneously and do a comparison of the images and see if the same images show corruption..What would that mean?
B. Shoot only in JPG, Not really an option, but I don't know what this would prove.
I'll be done vacationing soon so I can send in the camera for repairs, but I can't reproduce the problem and I'm not sure that they'd be able to debug this. I would assume that they'd start to replace hardware and hope for the best. So any advice would be greatly appreciated.
Regards,
Rodney