This is a déjà vu issue for me with previous cameras, albeit the opposite way now. Under exposure using the FGZ-540 with bounce flash in Av mode with P-TTL. Essentially, the flash goes off but there is insufficient light from it during the exposure to register anything. It is as if the photo is taken at X-sync shutter speed that then leads to the underexposure, because the ISO is relatively low expecting the flashlight to fill the rest.
Only workaround is to hit the green button and let the camera set the ISO, which invariably goes up to fill in the exposure but again, very little light to see from the flash.
Anyone else experience this?
edit: the FGZ-540 has just stopped firing for the exposure (pre-flash still fires, but not the second flash for the exposure), but has fired for me previously.
Another flash I have fires but always at full-power (see below with the first set of photos in this thread).
Last edited by Ash; 02-03-2019 at 05:02 AM.
Reason: changed circumstances