Forgot Password
Pentax Camera Forums Home
 

Reply
Show Printable Version Search this Thread
10-10-2018, 01:48 PM - 1 Like   #61
Junior Member




Join Date: Jan 2014
Posts: 36
After getting my K-1, the first thing I did was order a Canon A-type (microprism center dot) focusing screen from focusingscreen. I have gotten both A type and S type focusing screens for my previous Pentax cameras from him. After receiving the focusing screen, I spent an evening trying out the included plastic shims until I was happy with the accuracy. Notably, the stock shim felt much thicker than the ones that were on my K-3 and K-5 and I had to reduce the thickness of the shim for Canon's thicker focusing screen.


After seeing this post, I gave it a try by buying a Canon ec-S focusing screen. The only modification needed was to cut off the grab tab. As far as I can tell, everything seems to be fine. The Canon ec-model (1D) screen is close enough in size to Pentax's that no other modifications were needed. Predictably, the shimming I had done for the Canon A type was still valid for the S type as both were ec model screens.


General thoughts:

  • For the crop sensor cameras, using focusingscreen to cut the screens down to size really helps. Not so much for the full frame K-1 if you're using Canon ec screens.
  • Focusingscreen does re-attach the tab in the correct location for the K-1 screens, which makes handling a lot easier/safer.
  • Focusingscreen includes plastic shims, which most likely will be necessary. Easier than trying to fabricate your own.
  • The K-1's shim holder seems much more fiddley. Maybe the larger size (vs crop) meant that the plastic shims were less rigid and more likely to interfere with the focusing screen. Might want to look into sourcing/fabricating metal shims
  • Back when Pentax handled service themselves, the part # for focusing screens shims were known. Even after the shift to third party repair shops, if you knew the part #, you could ask some smaller camera shops to order them directly from Pentax for you. So far haven't had any luck with K-1 shims.


10-11-2018, 10:08 AM   #62
Otis Memorial Pentaxian
Loyal Site Supporter
stevebrot's Avatar

Join Date: Mar 2007
Location: Vancouver (USA)
Photos: Gallery | Albums
Posts: 34,380
QuoteOriginally posted by sprint113 Quote
Maybe the larger size (vs crop) meant that the plastic shims were less rigid and more likely to interfere with the focusing screen. Might want to look into sourcing/fabricating metal shims
FWIW, I found the plastic shims from focusingscreen to be a pain on the K-3. Placing the shim and getting it to stay in place was most difficult.


Steve
10-13-2018, 11:48 AM - 1 Like   #63
Forum Member




Join Date: Feb 2014
Photos: Gallery
Posts: 87
thank's a lot @6x7II for your DIY!

With my K-3, I used a screen from focusingscreen.com (K3) and searched for one for the K-1 and found your post.

I ordered a Canon Ec-A (like the microprism more) and cut away the nose. The part which needs more time was adjusting the new
shim that it's correct for focusing - with the original shim (~0,58mm thick), there was a huge front-focus.

So I decided to make a CAD-drawing of the original K-1 shim and then printed some of those with my 3d-printer.
The print quality is not that nice because the shim width is very thin but it holds in place and I found the thickness I need (~0,32mm).
I'm very happing because it's working great and right now the focusing with Samyang 135mm F2 is a lot of easier!

If someone want the cad drawing - feel free to ask...maybe someone has got the possibility for lasercutting or something else
Attached Images
 
10-13-2018, 11:09 PM   #64
Forum Member




Join Date: Dec 2016
Posts: 51
QuoteOriginally posted by Duc-Driver Quote
thank's a lot @6x7II for your DIY!

If someone want the cad drawing - feel free to ask...maybe someone has got the possibility for lasercutting or something else
Perhapt it would save me 10min if you could provide a STEP file. :-)

But I wonder (and I can use 3D-printer for 10kEur) how you can print something dimensionally stable to 0.05mm or better. I fear the idea to sand it down a little because of the dust. Oh and for people without a printer, there are company (like shapeways) that are printing for you. In this case it is possible to print in metal.

However, yesterday I use the new focussing the first time with my old SMC 200mm/2.5 in the zoo. I still recomend this to everyone. It made the fokusing live much easier!

Olaf

10-14-2018, 10:49 AM   #65
Forum Member




Join Date: Feb 2014
Photos: Gallery
Posts: 87
the dimensions are not that neccesary, yes - it should fit and be in place but the same thickness over the full frame is more important.

I send you an email with linkt to a step file
10-14-2018, 03:01 PM   #66
Gaseous Anomaly
Loyal Site Supporter
jcdoss's Avatar

Join Date: Nov 2012
Location: Jasper, AR
Photos: Gallery | Albums
Posts: 2,871
While reading threads here on third party focusing screens and trying to figure out whether or not they will include all the needed shims for a proper fit, and whether you guys are satisfied or not with your screens, the good boys and girls at focusingscreens.com put up a new link for K-1 mII screens now for sale. While I have no doubt these are the very same screens already available for the K-1 original, the fact that they did this while I was doing the research seems to me a Jungian synchronicity, so I suppose I should buy one.

I recently picked up some fast A* primes and have the K50/1.2 already and have been aggravated at low hit rate despite having just been told by my eye doctor that my eyesight is pretty good for the middle-aged but not yet quite old fart that I am. So I presume I need a focus assist of some kind.

I'm a bit leary of the S-type screens due to the brightness dropoff phenomenon, since I use some of my lenses with TCs that lower max f-stop past f/4, so I suppose split image finders are better? If you're using a FS screen on your K-1, which did you choose, and how did it work out for you? I'm leaning toward a split-image but also find the examples of the microprism assists quite striking. I'd also be interested in hearing something on the Nikon screens since everyone seems to get the Canons.

Last edited by jcdoss; 10-14-2018 at 03:10 PM.
10-14-2018, 07:44 PM   #67
Loyal Site Supporter
Loyal Site Supporter
UncleVanya's Avatar

Join Date: Jul 2014
Photos: Gallery | Albums
Posts: 15,987
Split prism goes dark with slower lenses.
11-08-2018, 07:11 PM   #68
New Member
estost's Avatar

Join Date: May 2016
Posts: 12
After spending hours crafting ever thinner plastic shims for my new Ec-A screen, I finally understood that I didn't need any shimming at all to achieve perfect focus The combined thickness of the original Pentax screen and its brass shim in my case exactly matched the thickness of the Canon screen. So I was in the luckiest of positions :-) At the same time this means that there may be K-1 bodies out there with original shims so thin that the Canon screen always will be too thick...

11-09-2018, 02:44 AM   #69
Forum Member




Join Date: Dec 2016
Posts: 51
QuoteOriginally posted by jcdoss Quote
I recently picked up some fast A* primes and have the K50/1.2 already and have been aggravated at low hit rate despite having just been told by my eye doctor that my eyesight is pretty good for the middle-aged but not yet quite old fart that I am. So I presume I need a focus assist of some kind.
My eyesight (with glasses) is very good. I can read the most bottom line at the usual doctor-test. In the last days I tested the Canon Ec screen with my new DFA 50/1.4. I like to say manual focus with this screen is better or the same than autofocus. The autofocus works very well to the point the camera likes to use. But with manual focus I focus to the point I like for a good picture. Of course this is not important for 2.8 or slower, but for 50/1.4 or 85/1.8 I prefer the manual focus. But before that is was much work to calibrate the screen to my camera!

Olaf
Reply

Bookmarks
  • Submit Thread to Facebook Facebook
  • Submit Thread to Twitter Twitter
  • Submit Thread to Digg Digg
Tags - Make this thread easier to find by adding keywords to it!
aps-c, changer, course, dslr, ec-b, full frame, full-frame, game, image, k-1, k1, k3, modification, pentax k-1, screen, screens, split, split focus screen, tab
Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Focussing screens and the 1.2 Transit Pentax SLR Lens Discussion 13 01-07-2016 02:26 PM
For Sale - Sold: REDUCED - 1/3-price Beattie Intenscreen with DIAGONAL Split Image for the LX fwcetus Sold Items 2 12-03-2015 05:40 PM
Split Focussing Screen for my K5's benjikan Pentax K-5 8 08-13-2012 08:40 PM
Split-image focussing screen BJ-61 for Pentax 67II phonoline Pentax Medium Format 4 09-24-2010 10:00 PM
Cheap split image focussing screen? ukbluetooth Pentax DSLR Discussion 40 04-11-2008 09:07 AM



All times are GMT -7. The time now is 07:13 AM. | See also: NikonForums.com, CanonForums.com part of our network of photo forums!
  • Red (Default)
  • Green
  • Gray
  • Dark
  • Dark Yellow
  • Dark Blue
  • Old Red
  • Old Green
  • Old Gray
  • Dial-Up Style
Hello! It's great to see you back on the forum! Have you considered joining the community?
register
Creating a FREE ACCOUNT takes under a minute, removes ads, and lets you post! [Dismiss]
Top