Wanted - Acquired: PH-RBJ 77mm DA*16-50mm Lens Hood

maximm · 01-07-2010, 03:46 PM

Staff note: This post may contain affiliate links, which means Pentax Forums may earn a small commission if a visitor clicks through and makes a purchase. If you would like to support the forum directly, you may also make a donation here.

Just like topic. I have been trying to find one all around but all i did find was SRS Micro Systems and they would not send outside the UK.

So if anyone can help me get hold of one i would be very glad, either new or old.

Will probably get one of these until a find a original for a decent price: http://cgi.ebay.com/77mm-77-mm-Flower-Petal-Crown-Lens-Hood-for-Canon-Nikon_...item3ca868d56c

They wanted £40 in the shop... No thank you...

Last edited by maximm; 01-07-2010 at 03:55 PM.

dnaseigel · 01-07-2010, 07:41 PM

If you could live without the clever little window that opens to let you spin a polarizing filter ring, you can use the hood from a Tokina 12-24mm f/4 or the 16-50 f/2.8. They will use the same bayonet fitting as the DA*16-50 and should cost a good deal less.

Best of luck on the hunt, and if nothing turns up I can probably dig up one of the Tokina hoods from my gigantic store of photographic miscellany.

Regards,
David

pixel r0n1n · 01-10-2010, 10:56 PM

i happen to have one, spare!

PM sent

01-07-2010, 03:46 PM	#1
maximm Forum Member Join Date: Dec 2009 Posts: 72 Feedback Score: 3 (100%)	*[ACQUIRED] PH-RBJ 77mm DA16-50mm Lens Hood** Staff note: This post may contain affiliate links, which means Pentax Forums may earn a small commission if a visitor clicks through and makes a purchase. If you would like to support the forum directly, you may also make a donation here. Just like topic. I have been trying to find one all around but all i did find was SRS Micro Systems and they would not send outside the UK. So if anyone can help me get hold of one i would be very glad, either new or old. Will probably get one of these until a find a original for a decent price: http://cgi.ebay.com/77mm-77-mm-Flower-Petal-Crown-Lens-Hood-for-Canon-Nikon_...item3ca868d56c They wanted £40 in the shop... No thank you... Last edited by maximm; 01-07-2010 at 03:55 PM.

01-07-2010, 07:41 PM	#2
dnaseigel Senior Member Join Date: Jan 2008 Location: Rockford, IL Posts: 179 Feedback Score: 16 (100%)	lens hood: If you could live without the clever little window that opens to let you spin a polarizing filter ring, you can use the hood from a Tokina 12-24mm f/4 or the 16-50 f/2.8. They will use the same bayonet fitting as the DA*16-50 and should cost a good deal less. Best of luck on the hunt, and if nothing turns up I can probably dig up one of the Tokina hoods from my gigantic store of photographic miscellany. Regards, David

01-10-2010, 10:56 PM	#3
pixel r0n1n Senior Member Join Date: Jan 2008 Location: 514 Posts: 123 Feedback Score: 11 (100%)	i have one! i happen to have one, spare! PM sent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wanted - Acquired: Sigma 77mm Lens Hood Shade LH825-03	manishved	Sold Items	0	10-14-2010 03:27 PM
Wanted - Acquired: PH-RBL 67mm hood & PH-RBH 77mm Hood	stl09	Sold Items	0	02-14-2010 11:37 AM
Wanted - Acquired: 77mm f1.8 black lens	stl09	Sold Items	2	12-06-2009 03:41 PM