Pentax 67ii service manual

swilf · 10-18-2011, 05:39 PM

Does anybody have a copy of Pentax 67ii service manual? The only one I managed to find on the web belongs to older 6x7. Got a strange problem with the shutter, gathering up courage to disassemble the body.

Thanks in advance.

iczek · 02-18-2012, 09:27 AM

Still need one? I have a copy.

Makten · 02-18-2012, 04:38 PM

Originally posted by iczek

Still need one? I have a copy.

I'd really want one! My metering prism is dead.

PM?

phonoline · 02-20-2012, 09:06 AM

what happened to the prism, Makten?

Makten · 02-20-2012, 10:08 PM

Originally posted by phonoline

what happened to the prism, Makten?

I don't know if it is the prism, but suddenly an error message ("PErr") appeared in the display and then the camera was stuck. This happened once before, but fixed itself after a while, but not so the last time.
Now I have to isolate the contacts between the prism and the body, and I can only use the camera with manual shutter speeds (full stops) without metering. This seems to be a fairly common problem with no solution.

iczek · 02-21-2012, 03:08 AM

Makten,
I have the same problem with my camera that I purchased from one of internet B&S list

After checking in local authorized Pentax service I know that my case is called: T100

Main board is failure.

Firstly, you should check the mechanism of the lens that push the aperture needle in the body. Than, check the electronic of the main board.
I do not know what is worst.... bad prism or bad main board

Makten · 02-21-2012, 10:17 AM

Originally posted by iczek

Makten,
I have the same problem with my camera that I purchased from one of internet B&S list

After checking in local authorized Pentax service I know that my case is called: T100

Main board is failure.

Firstly, you should check the mechanism of the lens that push the aperture needle in the body. Than, check the electronic of the main board.
I do not know what is worst.... bad prism or bad main board

Ah! Failure of the aperture mechanism would make a lot of sense, because the problem came when I attached my extension tube, which doesn't have a coupling for the aperture. So maybe something went wrong there. But still, the aperture works fine in manual mode.

iczek · 02-21-2012, 10:28 AM

Originally posted by Makten

Ah! Failure of the aperture mechanism would make a lot of sense, because the problem came when I attached my extension tube, which doesn't have a coupling for the aperture. So maybe something went wrong there. But still, the aperture works fine in manual mode.

My prism also works with manual mode one the lens. I think that your prism is ok as well as mine. The problem could be the mechanic only.
Please, let me know one thing... could you switch the meter mode on prism to multi-matrix and check if you can see the correct icon displayed in viefinder?
In ma case there is a problem with this icon displaying.

EdoNork · 03-16-2012, 08:22 AM

I'm interested in a copy too.

alipstadt · 03-16-2012, 01:13 PM

Me three. If electronic, I'd be happy to host it.

johnlsullivan3 · 03-21-2012, 04:04 PM

I would really like a copy too, please. I'm a new owner of a Pentax 67ii. Any help would be welcome.

swilf · 03-23-2012, 05:46 PM

Here it is:
Pentax67iiSM.pdf

johnlsullivan3 · 03-24-2012, 01:29 AM

iczek, would you shoot me a copy of the repair manual please?

EdoNork · 03-24-2012, 12:54 PM

Thank you vary much swilf!

obiyan19 · 09-24-2012, 03:21 AM

hi to all

anyone can reupload the file ? in advance, many thanks

10-18-2011, 05:39 PM	#1
swilf New Member Join Date: Oct 2011 Posts: 2	Pentax 67ii service manual Does anybody have a copy of Pentax 67ii service manual? The only one I managed to find on the web belongs to older 6x7. Got a strange problem with the shutter, gathering up courage to disassemble the body. Thanks in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone have a K20D Service manual please?	JohnX	Pentax DSLR Discussion	5	10-05-2011 01:44 AM
ME Super Service Manual	pandarocket	Film SLRs and Compact Film Cameras	20	03-17-2010 12:32 PM
Pentax digital spotmeter - service manual	SquintyEyes	Pentax Camera and Field Accessories	5	12-08-2009 04:23 PM
Need service manual for a PZ-1p.	Bob 256	Film SLRs and Compact Film Cameras	6	07-17-2008 07:47 AM

02-18-2012, 09:27 AM	#2
iczek New Member Join Date: Feb 2012 Posts: 5	Still need one? I have a copy.

02-18-2012, 04:38 PM	#3
Makten Inactive Account Join Date: Dec 2010 Location: Stockholm Posts: 224	Originally posted by iczek Still need one? I have a copy. I'd really want one! My metering prism is dead. PM?

02-20-2012, 09:06 AM	#4
phonoline Senior Member Join Date: Jun 2010 Location: Hamburg Posts: 267	what happened to the prism, Makten?

02-20-2012, 10:08 PM	#5
Makten Inactive Account Join Date: Dec 2010 Location: Stockholm Posts: 224	Originally posted by phonoline what happened to the prism, Makten? I don't know if it is the prism, but suddenly an error message ("PErr") appeared in the display and then the camera was stuck. This happened once before, but fixed itself after a while, but not so the last time. Now I have to isolate the contacts between the prism and the body, and I can only use the camera with manual shutter speeds (full stops) without metering. This seems to be a fairly common problem with no solution.

02-21-2012, 03:08 AM	#6
iczek New Member Join Date: Feb 2012 Posts: 5	Makten, I have the same problem with my camera that I purchased from one of internet B&S list After checking in local authorized Pentax service I know that my case is called: T100 Main board is failure. Firstly, you should check the mechanism of the lens that push the aperture needle in the body. Than, check the electronic of the main board. I do not know what is worst.... bad prism or bad main board

02-21-2012, 10:17 AM	#7
Makten Inactive Account Join Date: Dec 2010 Location: Stockholm Posts: 224	Originally posted by iczek Makten, I have the same problem with my camera that I purchased from one of internet B&S list After checking in local authorized Pentax service I know that my case is called: T100 Main board is failure. Firstly, you should check the mechanism of the lens that push the aperture needle in the body. Than, check the electronic of the main board. I do not know what is worst.... bad prism or bad main board Ah! Failure of the aperture mechanism would make a lot of sense, because the problem came when I attached my extension tube, which doesn't have a coupling for the aperture. So maybe something went wrong there. But still, the aperture works fine in manual mode.

02-21-2012, 10:28 AM	#8
iczek New Member Join Date: Feb 2012 Posts: 5	Originally posted by Makten Ah! Failure of the aperture mechanism would make a lot of sense, because the problem came when I attached my extension tube, which doesn't have a coupling for the aperture. So maybe something went wrong there. But still, the aperture works fine in manual mode. My prism also works with manual mode one the lens. I think that your prism is ok as well as mine. The problem could be the mechanic only. Please, let me know one thing... could you switch the meter mode on prism to multi-matrix and check if you can see the correct icon displayed in viefinder? In ma case there is a problem with this icon displaying.

03-16-2012, 08:22 AM	#9
EdoNork New Member Join Date: Mar 2012 Posts: 12	I'm interested in a copy too.

03-16-2012, 01:13 PM	#10
alipstadt New Member Join Date: Sep 2010 Location: NYC Posts: 2	Me three. If electronic, I'd be happy to host it.

03-21-2012, 04:04 PM	#11
johnlsullivan3 New Member Join Date: Mar 2012 Location: Ogden, Utah, USA Posts: 10	I would really like a copy too, please. I'm a new owner of a Pentax 67ii. Any help would be welcome.

03-23-2012, 05:46 PM	#12
swilf New Member Join Date: Oct 2011 Posts: 2 Original Poster	Here it is: Pentax67iiSM.pdf

03-24-2012, 01:29 AM	#13
johnlsullivan3 New Member Join Date: Mar 2012 Location: Ogden, Utah, USA Posts: 10	iczek, would you shoot me a copy of the repair manual please?

03-24-2012, 12:54 PM	#14
EdoNork New Member Join Date: Mar 2012 Posts: 12	Thank you vary much swilf!

09-24-2012, 03:21 AM	#15
obiyan19 New Member Join Date: Sep 2012 Posts: 3	hi to all anyone can reupload the file ? in advance, many thanks