[romansolar]

Staff note: This post may contain affiliate links, which means Pentax Forums may earn a small commission if a visitor clicks through and makes a purchase. If you would like to support the forum directly, you may also make a donation here.

---

Hello pentaxians,

i dont know why i am always looking for complicated "deals"

this time i bought DKL lens to Pentax pk adapter and i would like to mount on it Rodenstock 100mm lens

is it possible? couold you help?

much appreciate

[wombat2go]

Here you go

You will need the Pentax Bellows M and a machined adaptor.
A possible problem might be the position of the N2 plane of your Rodenstock 100mm
The Bellows M fully collapsed takes about 65 mm of the register, so you will have about 35mm for an adaptor so that the distance between the K01 sensor plane and your lens N2 can be 100mm .
In my case the lens is a Rodenstock 90mm enlarger lens, and and I machined a M39 whitworth internal thread adaptor ( Leica mount) to fit inside the K mount on the end of the bellows,

[romansolar]

omg! thank you. Sounds so complicated ;(

i think i will leave this idea for now. Also no handheld shooting i guess. I would like to use purchased dkl adapter so i am going to find some interesting Voigtlander lenses

anyway, you are very kind