K7 write/read speed reduction after new firmware...

mxlinn · 10-15-2010, 08:10 PM

Just updated firmware to 1.10, but noticed a significant drop in write/read speed . It takes a few seconds getting images to appear on the monitor (instant w/o memory card). Did everyone has the same experience or it's due to I had set a few fuctions to on position..."shadow correction, distortion correction and lateral chromatic adjustment"?

Last edited by mxlinn; 10-16-2010 at 06:55 AM.

Jasvox · 10-15-2010, 08:43 PM

If you have those functions set to "on" as you stated, it will take about 2 seconds for the taken image to appear on your LCD. Turn them "off" and see what happens.

Jason

GrinMode · 10-15-2010, 08:47 PM

You turned on a bunch of image processing functions. It takes time to process a shot before it can be displayed. Like Jasvox suggested, turn them off.

mxlinn · 10-15-2010, 09:09 PM

just did and it worked...instant display, thanks guys.

10-15-2010, 08:10 PM	#1
mxlinn Senior Member Join Date: Dec 2009 Location: NORTHEAST USA Posts: 193	K7 write/read speed reduction after new firmware... Just updated firmware to 1.10, but noticed a significant drop in write/read speed . It takes a few seconds getting images to appear on the monitor (instant w/o memory card). Did everyone has the same experience or it's due to I had set a few fuctions to on position..."shadow correction, distortion correction and lateral chromatic adjustment"? Last edited by mxlinn; 10-16-2010 at 06:55 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K-m Write Speed	dave9t5	Pentax DSLR Discussion	13	02-27-2009 10:22 AM
k10d read/write speed?	silent_eyes	Pentax Camera and Field Accessories	3	09-20-2008 04:03 PM
Pentax k110d Read/Write Delay?	bfrikken	Pentax DSLR Discussion	1	04-30-2008 10:01 AM
SDHC write speed	cautious	Photographic Technique	3	09-16-2007 02:41 PM
Time Exposure - Bulb setting - Read write times	Vatis	Pentax DSLR Discussion	7	09-05-2007 07:38 AM

10-15-2010, 08:43 PM	#2
Jasvox Veteran Member Join Date: Oct 2007 Location: Melbourne, Australia Posts: 3,107	If you have those functions set to "on" as you stated, it will take about 2 seconds for the taken image to appear on your LCD. Turn them "off" and see what happens. Jason

10-15-2010, 08:47 PM	#3
GrinMode Senior Member Join Date: Mar 2010 Posts: 249	You turned on a bunch of image processing functions. It takes time to process a shot before it can be displayed. Like Jasvox suggested, turn them off.

10-15-2010, 09:09 PM	#4
mxlinn Senior Member Join Date: Dec 2009 Location: NORTHEAST USA Posts: 193 Original Poster	just did and it worked...instant display, thanks guys.