Despite I (and others as well) have already pointed out what's wrong with your reversed "engineered" chart, it's rather pity that you either haven't listened or still be unable to think about others' comments or yet don't understand, I will not explain further. (It doesn't matter anyway if you oneself understand or not, individually.)
What I want to tell ALL Pentax users here is that *latest* version of *your* chart will either:-
1. Fool the camera and make it unable to focus or hunt seriously for a properly aligned AF sensor against the centre;
2. Create FF or BF for a AF sensor which is shifted off the centre, although in real no such FF or BF will be seen.
If you really want to sell more of your books and promote your "gear books" (and as far as possible, for what I could see), I hope you should learn better knowledge yourself and don't create more unreal problems and mislead others as it shouldn't be.
No offense intended but these are just my humble opinions. I just feel upset and sad to see when such technically incorrect stuff and misconcepts are spreaded, especially by laymen who have little knowledge about the gear technics, but just mis-concepts (not even to say it can help anyone - only the reverse will be true).
NOTE: For those all others who really wish to adjust the AF using the K20D's built-in custom function or just wish to check BF / FF of our Pentax DSLRs other than the K20D, just tape a target on something which is vertically flat, e.g., a wall, and shoot to it directly (as PentaxPoke already pointed out in the beginning), don't use such a misleading "tool". Bottom Line: Simply use the original D70 test chart as a *rough* reference if one still wishes to shoot such "45 degree" chart, which is still usable and technically somehow correctly (just because the original inventor knew how an AF system of a SLR works).
Originally posted by k10dbook Hello Pentaxians and friends,
Before you read this reply, let me just tell you that pentaxforums is as good a Pentax forum as it gets. This is an exclusive Pentax site and lots of constructive information is shared here.
Yesterday I ishared an AF Adjustment Chart to help in determining if any particular lens has front or back focus problems. As I often do, I posted the major portion of the article on various Pentax forums. Several Pentaxians emailed me with some good suggestions as to how to improve the chart. I first tested the chart with a lens that focused as close as just a few inches and my chart worked well at eliminating the back focus problem I had. The lens was a Pentax SMC-F 35-70mm macro. Every time I would take a macro picture, it seemed that the actual photograph would be out of focus when, I was certain that I had focused properly. The K20D, with the AF Adjustment function was the right camera to test and adjust the lens.
I recognized yesterday that the target cross was too small for constant and accurate results. I changed the chart and incorporated a much larger center portion while retaining the overall design. Additionally, I scaled the center portion to almost the size of an 81/2” x 11” letter size paper. I still believe that it is easier to have the chart standing at 45 degree from horizontal while testing the lenses with the camera on a tripod and as horizontally leveled as possible.
If you look at the chart, the center is oval in shape when viewed perpendicularly. The reason for this is because when focusing on the chart with your camera leveled, you will notice that the oval shape turns into a circle, helping in visualizing when the camera/lens is leveled.
The oversized chart can be attached to the smaller chart with paper clips, to retain the 45 degree angle. It is at 45 deg because that way, the depth of field can be seen. If the sheet was flat, there wouldn’t be any depth to it. The Metric and English dimensions are accurate on the small chart, but the enlarged chart shown the dimensions also enlarged. Still, it does show if you have back or front focus errors.
Again, if other suggestions are emailed to me, I will first make sure that we all agree with the improvements and re-issue a once again improved chart.
Now, I assume that we all own and use Pentax equipment. My blog, the other Pentax blogs, as well as the dedicated Pentax forums should all have one thing in common. That is to help each other as Pentax users.
The reason I am bringing this up is that I experienced some rather condescending comments from some members of forums. Its one thing to share your knowledge with the entire Pentax audience, but it’s another thing to be rude and pompous toward other Pentax brothers and sisters. I won’t name any of the forums, as I am sure you already visit every Pentax sites on the internet. At the top of the list for rudeness, is a member from Hong Kong whose name you probably already know. That person should tone down a little from his self-proclaimed expertise.
A Pentax site should be embracing all Pentax users from the person with no experience that just bought a Pentax DSLR today to the most talented and experienced professional photographer in the world, whoever that is.
I wrote before that owning a Pentax DLSR was like being part of a big family. I truly believe that Pentaxians are a special loyal group. Let’s help each other become better photographers.
Thank you for reading, and thank you for all the constructive comments.
Download the
AF ADJUSTMENT CHART HERE
Yvon Bourque