Ok so I removed the hot filter from my recently purchased K100D. I only have a 18-250 to test it with, everything works fine, but the 18-250 won't focus to infinity in IR and I didn't replace the filter with anything yet.
This isn't for the non electronic savvy to do either, I had to unsolder 4 wires to remove the circuit board that is in front of the sensor, it's not hard to do but there is plenty of places to mess something up.
Here are a couple first pics.
And i've added a couple RAWs for download:
http://home.comcast.net/~starfire1010/ir.zip
Last edited by Avantphoto; 07-28-2008 at 03:35 PM.