[shadeless]

there is another way:

you have to set an option in the custom menu first:
on the k20d its item nr26 (green button in TAv & M).
if you set the value to 2 (Tv shift), you can use M mode, set exposure (aperture and shutter) manually and do a bracket.

the camera will then only change the shutter value whilst bracketing and will always use the same shutter values on the next brackets.

this way you get consistent exposure on all brackets you do.

hope this is what you are looking for.

greetz
shadeless

p.s. i'm a big fan of your hdr timelapses btw

---

Last edited by shadeless; 09-22-2008 at 05:59 AM.

[milapse]

there is another way:

you have to set an option in the custom menu first:
on the k20d its item nr26 (green button in TAv & M).
if you set the value to 2 (Tv shift), you can use M mode, set exposure (aperture and shutter) manually and do a bracket.

Doesn't seem to work on my k10d... Is there something with the green button?

p.s. i'm a big fan of your hdr timelapses btw

Thank you very much!

[milapse]

Manual lens is one solution. Just tried a pent-M 50mm f/2 and it worked. In manual mode it did 1000,250,15,4 . Perfect!