[jbinpg]

Hi, Adam. Finally got around to testing out the latest code. Looks good. Summary below:

Code version - v1.0.0 beta 12
OS - Ubuntu 18.10
java version - openjdk version "11.0.1" 2018-10-16
Connection mode - USB
Camera model - K-1 v1.50

- Camera timeout must be set to Off to avoid timeout detection by program which will reset the connection.
- All camera adjustments must be made before processing the queue. Once the queue processing has begun, no camera adjustments will be recognized by the program.
- Aborting the queue still results in a hung program. Best to let the queue finish processing. If you are doing tests, make them short.
- Once the queue finishes without an abort, the Add to Queue button will work but not before.
- All file transfers to designated folder take place after all frames have been taken. The frames are saved to a tmp folder until the queue is finished.

The addition of the queue slider label works perfectly and removes any guesswork by the user. File transfer to tmp folder is down to 4 seconds now for a 36M FF frame, faster than tmp ->selected save folder. Precision of interval of successive frame times is in the order of a few thousands of a second.

Jack

---

Last edited by jbinpg; 11-20-2018 at 09:14 PM.

[Adam]

Hi, Adam. Finally got around to testing out the latest code. Looks good. Summary below:

Code version - v1.0.0 beta 12
OS - Ubuntu 18.10
java version - openjdk version "11.0.1" 2018-10-16
Connection mode - USB
Camera model - K-1 v1.50

- Camera timeout must be set to Off to avoid timeout detection by program which will reset the connection.
- All camera adjustments must be made before processing the queue. Once the queue processing has begun, no camera adjustments will be recognized by the program.
- Aborting the queue still results in a hung program. Best to let the queue finish processing. If you are doing tests, make them short.
- Once the queue finishes without an abort, the Add to Queue button will work but not before.
- All file transfers to designated folder take place after all frames have been taken. The frames are saved to a tmp folder until the queue is finished.

The addition of the queue slider label works perfectly and removes any guesswork by the user. File transfer to tmp folder is down to 4 seconds now for a 36M FF frame, faster than tmp ->selected save folder. Precision of interval of successive frame times is in the order of a few thousands of a second.

Jack

Thanks for the info. It looks like some of the changes I made earlier broke the queue abort functionality. This should now be fixed, long with the program hanging. Please let me know

Also, going forward downloads will only be available on github to avoid file duplication:

Releases · PentaxForums/PentaxWifi · GitHub

[Adam]

- All camera adjustments must be made before processing the queue. Once the queue processing has begun, no camera adjustments will be recognized by the program.

Forgot to add- to make this happen, you need to enable the "sync camera settings" option. Otherwise the settings will only be applied at the time of capture. Also, if a photo is being captured, this will delay other commands.

[Ha Di Ko]

That is an error being returned by the camera. A current limitation of the Ricoh SDK is that it slows down significantly if there are lots of files on the card. Try using a smaller card and you should be fine. Alternatively, go into the menu and reconnect to the camera.

Thanks it works !

One issue
when i take pics with the K1 by hand.
filelist upadate works fine in usb-mode
but not in wifi-mode ?

[Adam]

Thanks it works !

One issue
when i take pics with the K1 by hand.
filelist upadate works fine in usb-mode
but not in wifi-mode ?

I think this depends on the events the cameras sends, though it would be weird for the events not to happen in wifi mode. I will take a look! Thanks!

[beholder3]

You got me really excited about all these possibilities, but unfortunately it looks like the feature does not work in the SDK. So, fine focus adjustments aren't possible at the moment.

That is sad for a feature that officially should work.

Maybe you can describe the situation to Ricoh here: RICOH Developer Connection Management Console and with a lot of hope they may fix it.

While I am not a big macro shooter myself I do believe an automated focus bracketing option would be loved by many macro enthusiasts.

[sbh]

Somehow I can't get the USB connection to work. I plug it in but the app says "Communication with camera failed. Please ensure you first connect to cameras wifi network. Retry?"

Connecting via wifi works. When I plug in the USB cable it loses connection.
(1.0.0 b13 on MacOS 10.14.1)

That is sad for a feature that officially should work.

Maybe you can describe the situation to Ricoh here: RICOH Developer Connection Management Console and with a lot of hope they may fix it.

While I am not a big macro shooter myself I do believe an automated focus bracketing option would be loved by many macro enthusiasts.

That's a useful feature I often use. Not only for macro, but also for normal closeups like tabletop/product shots. It would make sense to be included in the sdk.

[Adam]

Somehow I can't get the USB connection to work. I plug it in but the app says "Communication with camera failed. Please ensure you first connect to cameras wifi network. Retry?"

Connecting via wifi works. When I plug in the USB cable it loses connection.
(1.0.0 b13 on MacOS 10.14.1)




That's a useful feature I often use. Not only for macro, but also for normal closeups like tabletop/product shots. It would make sense to be included in the sdk.

That message is indicative of the software being run in wifi mode. Use the launcher for USB mode and you should be good.

[jbinpg]

Here are the results of a run with the latest code. Worse than previous in that the connection is being reset frequently for no apparent reason. How often does the program poll for a connection? I set up a queue using 5.6,1/250,1600,0.0 for 10 frames at 10s intervals and got 20 frames at non-deterministic intervals. It got stuck on the first frame for some reason and then reset the connection after every 2nd or 3rd frame. I have attached the terminal session for the latest run so you can see for yourself.

As for the Add to Queue button, no change. Only works after queue has processed and files have finished downloading.

- Jack

=============

Code version - v1.0.0 beta 13
OS - Ubuntu 18.10
java version - openjdk version "11.0.1" 2018-10-16
Connection mode - USB
Camera model - K-1 v1.50
Camera Auto Power Off setting = Off
Camera mode = M

=============

./run_mac_unix_usb.sh
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Disconnected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=4.5, currentShutterSpeed=30, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=4.5, currentShutterSpeed=30, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=0.5, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=0.5, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121185239920}
Capturing StillImage has started. Capture ID: 20181121185239920
Image Stored. Name: K1A_9180.PEF
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/file7tUsqqthumb_K1A_9180.JPG}
Downloaded: /tmp/thumb2952327332460235141K1A_9180.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/filexmM523K1A_9180.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9180.PEF
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121185757711}
Capturing StillImage has started. Capture ID: 20181121185757711
Image Stored. Name: K1A_9181.PEF
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/filelieK15thumb_K1A_9181.JPG}
Downloaded: /tmp/thumb2263227977597024572K1A_9181.PEF
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121185841553}
Capturing StillImage has started. Capture ID: 20181121185841553
Image Stored. Name: K1A_9182.PEF
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/file34o1kYthumb_K1A_9182.JPG}
Downloaded: /tmp/thumb5308192559672362819K1A_9182.PEF
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121185925697}
Capturing StillImage has started. Capture ID: 20181121185925697
Image Stored. Name: K1A_9183.PEF
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/file9CBoaIthumb_K1A_9183.JPG}
Downloaded: /tmp/thumb2108754220430265586K1A_9183.PEF
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190009758}
Capturing StillImage has started. Capture ID: 20181121190009758
Image Stored. Name: K1A_9184.PEF
Capture Complete. Caputure ID: 20181121190009758
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/fileTcWPijthumb_K1A_9184.JPG}
Downloaded: /tmp/thumb11841902407462929983K1A_9184.PEF
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190019778}
Capturing StillImage has started. Capture ID: 20181121190019778
Image Stored. Name: K1A_9185.PEF
Capture Complete. Caputure ID: 20181121190019778
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/filenuETCkthumb_K1A_9185.JPG}
Downloaded: /tmp/thumb17426903220154957648K1A_9185.PEF
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190029712}
Capturing StillImage has started. Capture ID: 20181121190029712
Image Stored. Name: K1A_9186.PEF
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/filethjyMLthumb_K1A_9186.JPG}
Downloaded: /tmp/thumb18120453582043164520K1A_9186.PEF
Shooting interrupted on frame 2. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190113818}
Capturing StillImage has started. Capture ID: 20181121190113818
Image Stored. Name: K1A_9187.PEF
Capture Complete. Caputure ID: 20181121190113818
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/file4u7wj4thumb_K1A_9187.JPG}
Downloaded: /tmp/thumb16780626374634956284K1A_9187.PEF
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190123636}
Capturing StillImage has started. Capture ID: 20181121190123636
Image Stored. Name: K1A_9188.PEF
Capture Complete. Caputure ID: 20181121190123636
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/filey9vIsMthumb_K1A_9188.JPG}
Downloaded: /tmp/thumb7338345373847399168K1A_9188.PEF
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190133656}
Capturing StillImage has started. Capture ID: 20181121190133656
Image Stored. Name: K1A_9189.PEF
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/fileK8eCPUthumb_K1A_9189.JPG}
Downloaded: /tmp/thumb472160592922659208K1A_9189.PEF
Shooting interrupted on frame 4. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190217719}
Capturing StillImage has started. Capture ID: 20181121190217719
Image Stored. Name: K1A_9190.PEF
Capture Complete. Caputure ID: 20181121190217719
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/filequSEdUthumb_K1A_9190.JPG}
Downloaded: /tmp/thumb6730468497642215010K1A_9190.PEF
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190227839}
Capturing StillImage has started. Capture ID: 20181121190227839
Image Stored. Name: K1A_9191.PEF
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/fileYT5NUjthumb_K1A_9191.JPG}
Downloaded: /tmp/thumb17731488180998444694K1A_9191.PEF
Shooting interrupted on frame 5. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190311824}
Capturing StillImage has started. Capture ID: 20181121190311824
Image Stored. Name: K1A_9192.PEF
Capture Complete. Caputure ID: 20181121190311824
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/fileAdAWMAthumb_K1A_9192.JPG}
Downloaded: /tmp/thumb1554843813228464779K1A_9192.PEF
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190321833}
Capturing StillImage has started. Capture ID: 20181121190321833
Image Stored. Name: K1A_9193.PEF
Capture Complete. Caputure ID: 20181121190321833
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/fileqgdpAhthumb_K1A_9193.JPG}
Downloaded: /tmp/thumb6568674601096842898K1A_9193.PEF
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190331844}
Capturing StillImage has started. Capture ID: 20181121190331844
Image Stored. Name: K1A_9194.PEF
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/file6ztJCothumb_K1A_9194.JPG}
Downloaded: /tmp/thumb10396654192833563672K1A_9194.PEF
Shooting interrupted on frame 7. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=2018112119041656}
Capturing StillImage has started. Capture ID: 2018112119041656
Image Stored. Name: K1A_9195.PEF
Capture Complete. Caputure ID: 2018112119041656
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/file6XQBqnthumb_K1A_9195.JPG}
Downloaded: /tmp/thumb15570684889083441480K1A_9195.PEF
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190425954}
Capturing StillImage has started. Capture ID: 20181121190425954
Image Stored. Name: K1A_9196.PEF
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/file8CfF3Lthumb_K1A_9196.JPG}
Downloaded: /tmp/thumb10204191786567505315K1A_9196.PEF
Shooting interrupted on frame 8. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190509884}
Capturing StillImage has started. Capture ID: 20181121190509884
Image Stored. Name: K1A_9197.PEF
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/files3Uum1thumb_K1A_9197.JPG}
Downloaded: /tmp/thumb1753099050866678050K1A_9197.PEF
Shooting interrupted on frame 8. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190553798}
Capturing StillImage has started. Capture ID: 20181121190553798
Image Stored. Name: K1A_9198.PEF
Capture Complete. Caputure ID: 20181121190553798
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/file0CTrC7thumb_K1A_9198.JPG}
Downloaded: /tmp/thumb485400228700226196K1A_9198.PEF
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190603724}
Capturing StillImage has started. Capture ID: 20181121190603724
Image Stored. Name: K1A_9199.PEF
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/filekdY6HDthumb_K1A_9199.JPG}
Downloaded: /tmp/thumb813952205310569886K1A_9199.PEF
Shooting interrupted on frame 9. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121190647542}
Capturing StillImage has started. Capture ID: 20181121190647542
Image Stored. Name: K1A_9200.PEF
Capture Complete. Caputure ID: 20181121190647542
USB storeThumbnail Transfer SUCCEEDED. DATA: {filePath=/tmp/fileyCstq0thumb_K1A_9200.JPG}
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
Downloaded: /tmp/thumb12401915192331300252K1A_9200.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileUbl8VoK1A_9181.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9181.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileCYf9h6K1A_9182.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9182.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileuSpEr6K1A_9183.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9183.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileCgtzbpK1A_9184.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9184.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileeHFSr0K1A_9185.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9185.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileep8bLUK1A_9186.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9186.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileVpDnj8K1A_9187.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9187.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/file8Zq6tDK1A_9188.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9188.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileWpfarrK1A_9189.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9189.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileYbZOmyK1A_9190.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9190.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileD0WXoYK1A_9191.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9191.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileQ05sYGK1A_9192.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9192.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/filekXtcLIK1A_9193.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9193.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/file08nsg3K1A_9194.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9194.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/filexHL97GK1A_9195.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9195.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileOvl5BDK1A_9196.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9196.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/filePow0zTK1A_9197.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9197.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/file6HsebtK1A_9198.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9198.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileEjhYklK1A_9199.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9199.PEF
USB storeImage Transfer SUCCEEDED. DATA: {filePath=/tmp/fileCssQbxK1A_9200.PEF}
Downloaded: /home/jb/Pictures/K1/K1A_9200.PEF

---------- Post added 11-21-18 at 11:45 AM ----------

Oops, forgot to add that Abort Queue no longer hangs the program. Bravo!

Jack

[Adam]

Can you test it with Java 8 and see if you get the same behavior?

[Ha Di Ko]

ubuntu 16.04 java 8 it's similar; don't work; tried it a few hours ago

[Adam]

ubuntu 16.04 java 8 it's similar; don't work; tried it a few hours ago

Interesting- it worked fine for me on ubuntu 16. Will take another look.

[jbinpg]

Tried again but with program file transfers turned off. This time it could not process the queue at all. The program does not see a successful capture and resets the connection after every attempted capture. Terminal output below. Note that the interval between attempts is about 34 seconds instead of the requested queue interval of 5 seconds.

Jack

==========

Code version - v1.0.0 beta 13
OS - Ubuntu 18.10
java version - openjdk version "11.0.1" 2018-10-16
Connection mode - USB
Camera model - K-1 v1.50
Camera Auto Power Off setting = Off
Camera mode = M
Program file transfer = Off
Program Auto reconnect/Resume queue = On

==========

$ ./run_mac_unix_usb.sh
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Disconnected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121233122425}
Capturing StillImage has started. Capture ID: 20181121233122425
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121233330969}
Capturing StillImage has started. Capture ID: 20181121233330969
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121233405188}
Capturing StillImage has started. Capture ID: 20181121233405188
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121233439189}
Capturing StillImage has started. Capture ID: 20181121233439189
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121233513171}
Capturing StillImage has started. Capture ID: 20181121233513171
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121233547356}
Capturing StillImage has started. Capture ID: 20181121233547356
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121233621622}
Capturing StillImage has started. Capture ID: 20181121233621622
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121233655674}
Capturing StillImage has started. Capture ID: 20181121233655674
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121233729695}
Capturing StillImage has started. Capture ID: 20181121233729695
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121233803707}
Capturing StillImage has started. Capture ID: 20181121233803707
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=20181121233837922}
Capturing StillImage has started. Capture ID: 20181121233837922
Shooting interrupted on frame 0. Auto reconnecting and restarting.
USB DetectDevice Detected 1 devices. DATA: {USB Connection0=Connected, Firmware Version0=1.50, Model0=PENTAX K-1, Manufacturer0=RICOH IMAGING COMPANY LTD., Serial Number0=6370527, Detected Devices=1}
USB ConnectCamera Connection SUCCEED
USB SetSock
USB GetAllSettings Retrieval succeeded. DATA: {availableCaptureMethod=Movie|StillImage, availableShutterSpeed=30|20|15|10|8|6|4|3|2|1.5|1|0.7|0.5|0.3|1/4|1/6|1/8|1/10|1/15|1/20|1/30|1/45|1/60|1/90|1/125|1/180|1/250|1/350|1/500|1/750|1/1000|1/1500|1/2000|1/3000|1/4000|1/6000|1/8000|, currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, availableISO=100|200|400|800|1600|3200|6400|12800|25600|51200|102400|204800|, availableFNumber=4.5|5.6|6.7|8.0|9.5|11|13|16|19|22|, currentISO=1600, availableExposureCompensation=5.0|4.5|4.0|3.5|3.0|2.5|2.0|1.5|1.0|0.5|0.0|-0.5|-1.0|-1.5|-2.0|-2.5|-3.0|-3.5|-4.0|-4.5|-5.0|, currentCaptureMethod=StillImage}
USB SetSettings Setting all settings succeeded. DATA: {currentFNumber=5.6, currentShutterSpeed=1/250, currentExposureCompensation=0.0, currentISO=1600}
USB StartCapture Capture OK DATA: {CaptureState=Executing, CaptureMethod=StillImage, CaptureID=2018112123391244}
Capturing StillImage has started. Capture ID: 2018112123391244
Shooting interrupted on frame 0. Auto reconnecting and restarting.

[Adam]

It looks like the camera is getting no events for some reason. As I wasn't able to reproduce this, I look at a look at the SDK limitations, and it looks like there are many conditions under which the events fail to fire or bug out. Most notably, if you have the camera set to save the files on multiple cards, things won't work. Overall, it seems like the USB SDK has more stability problems than the Wi-Fi SDK, which is already a little crazy if you shoot in RAW+.

Known Issues

[jbinpg]

Yes, that makes sense. I suppose that means we would need to wait for an updated SDK. The good news is that using the program as a simple transfer program after manually triggering a capture works perfectly. So you lose the hands-off interval function but you still have the transfer function.

Jack