PF Holiday Loyal Site Supporter Special | December Pentax Lens Tournament

sindbad1 · 10-23-2019, 03:08 PM

Somebody gave me a Pentax K100D. He told me, that the display had been replaced. Since then it displays everything with inverted tones. Every picture looks like a negative. Has anyone an idea how to fix this?

MarkJerling · 10-23-2019, 03:31 PM

Originally posted by sindbad1

Somebody gave me a Pentax K100D. He told me, that the display had been replaced. Since then it displays everything with inverted tones. Every picture looks like a negative. Has anyone an idea how to fix this?

I've never seen something like that. Can you post a photo?

**enoeske** · 10-23-2019, 03:53 PM - **1 Like**

Is it just the display or are the resulting photos actually inverted (jpgs) ?

**UncleVanya** · 10-23-2019, 04:23 PM

Originally posted by enoeske

Is it just the display or are the resulting photos actually inverted (jpgs) ?

That's a key question.

Not a Number · 10-23-2019, 05:01 PM

If the images only show on the display it is a good chance the parts are either defective or improperly replaced. Reseating or resoldering the connectors might help.

Lowell Goudge · 10-23-2019, 05:23 PM

My experience with displays is that sometimes the matrix connection of the display gets shifted just a bit and it results in a seemingly negative image. I forget now what device I had to retake apart and rebuild now, but this was the end result.

sindbad1 · 10-24-2019, 12:59 AM

This doesn't effect the images. I wouldn't even mind if they were negative, because than I could use that body for quick and easy scans of images on bw oder coloured negatives.

I bought that body to disable the SDM of my DA* 300 mm. Now I keep it just in case that need ever occurs again.Therefore it is not a real issue, that everything is inverted on the display. But it would be nice, if there is a easy hack with the buttons. I will not takeit apart.

10-23-2019, 03:08 PM	#1
sindbad1 Forum Member Join Date: Jun 2010 Location: Germany Posts: 68	Inverted image on display of a Pentax K100D Somebody gave me a Pentax K100D. He told me, that the display had been replaced. Since then it displays everything with inverted tones. Every picture looks like a negative. Has anyone an idea how to fix this?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nature Inverted dining	pichaser	Post Your Photos!	5	08-14-2018 12:21 AM
Abstract mums inverted	dcmsox2004	Post Your Photos!	3	07-21-2018 09:09 AM
HELP - inverted apperture?!?	n-light	Troubleshooting and Beginner Help	4	09-06-2017 09:23 AM
Puzzling glow in inverted SMC-M 28mm/3.5	LensBeginner	Troubleshooting and Beginner Help	17	11-21-2016 08:49 PM
unable to display image on back display	Starwars50	Pentax K-3	4	06-24-2015 02:48 AM

10-23-2019, 03:31 PM	#2
MarkJerling Moderator Site Supporter Join Date: May 2012 Location: Wairarapa, New Zealand Photos: Gallery \| Albums Posts: 14,892	Originally posted by sindbad1 Somebody gave me a Pentax K100D. He told me, that the display had been replaced. Since then it displays everything with inverted tones. Every picture looks like a negative. Has anyone an idea how to fix this? I've never seen something like that. Can you post a photo?

10-23-2019, 03:53 PM - 1 Like	#3
enoeske Site Supporter Join Date: Jul 2009 Location: Surprise, Az Photos: Gallery Posts: 2,133	Is it just the display or are the resulting photos actually inverted (jpgs) ?

10-23-2019, 04:23 PM	#4
UncleVanya Loyal Site Supporter Join Date: Jul 2014 Photos: Gallery \| Albums Posts: 18,069	Originally posted by enoeske Is it just the display or are the resulting photos actually inverted (jpgs) ? That's a key question.

10-23-2019, 05:01 PM	#5
Not a Number Moderator Join Date: Mar 2012 Location: Venice, CA Posts: 7,678	If the images only show on the display it is a good chance the parts are either defective or improperly replaced. Reseating or resoldering the connectors might help.

10-23-2019, 05:23 PM	#6
Lowell Goudge Pentaxian Join Date: Jan 2007 Location: Toronto Photos: Gallery \| Albums Posts: 16,318	My experience with displays is that sometimes the matrix connection of the display gets shifted just a bit and it results in a seemingly negative image. I forget now what device I had to retake apart and rebuild now, but this was the end result.

10-24-2019, 12:59 AM	#7
sindbad1 Forum Member Join Date: Jun 2010 Location: Germany Posts: 68 Original Poster	This doesn't effect the images. I wouldn't even mind if they were negative, because than I could use that body for quick and easy scans of images on bw oder coloured negatives. I bought that body to disable the SDM of my DA* 300 mm. Now I keep it just in case that need ever occurs again.Therefore it is not a real issue, that everything is inverted on the display. But it would be nice, if there is a easy hack with the buttons. I will not takeit apart.

Thread Tools	Search this Thread
	Search this Thread: Advanced Search

Inverted image on display of a Pentax K100D

PF Holiday Loyal Site Supporter Special | December Pentax Lens Tournament