3D drawing of FA 24-90 lens hood

3D drawing of FA 24-90 lens hood · 03:00 AM

Hello,

I would like to know if someone would be able to provide me a 3D drawing of the hood for the lens SMC PENTAX-FA 24-90 mm IF AL f3.5-4.5

I lost mine and am having a hard time to find one at a reasonnable price, so I though I would have done by some 3D printing services.

Additionnally, if someone has some good feedback for such service in Europe I would be happy to hear...

D1N0 · 10-10-2017, 03:30 AM

Wouldn't the PH-RBM 67mm work? It is the Hood for the DA 17-70 F4. Used Pentax Lens Hood PH-RBM67 For Pentax (17-70mm) | eBay

Snappertim · 10-10-2017, 04:32 AM

The lens hood for the old FA-J 18-35 is identical ( I have both lens and hoods and I can see no difference) and available used from many sources code PH-RBB67, code for the 24-90 3.5-4.5 is PH-RBE67.
Regards Tim

leekil · 10-10-2017, 12:51 PM

In the lens database, the 18-35 hood is listed as PH-RBL 67, which is the one that I have on mine. It is slightly shallower than the PH-RBE 67, which makes sense, since the focal length is wider.

rrstuff · 10-10-2017, 10:46 PM

3D printing will not give you the same quality, especially one that is cheaper than buying a hood from ebay, or a third party manufacturer, e.g. JJC.

lepiallou · 10-11-2017, 12:20 AM

Thanks D1N0, Snappertim and leekil.

I have the PH-RBM and tried on the FA 24-90 . It doesn't show any vignetting, however it is not the one designed for the lens, which I would higlhy prefer.

rrstuff: I didn't find anything below $50 for the PH-RBE67. 3D printing service I found would be much less than that and I would have a sun-hood designed for lens. Hence my original question.

lepiallou
	View full profile
	Contact via private message
	Find other posts by lepiallou
	Find threads started by lepiallou
	Find threads in which lepiallou has posted

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
F 24-50 or FA 24-90?	normhead	Pentax SLR Lens Discussion	24	08-26-2017 05:38 PM
For Sale - Sold: K20d, fa 24-90, da 12-24	stuffjunkie	Sold Items	4	09-25-2012 05:33 AM
Cheap 3D - Sony Bloggie, Fuji W3, LG Optimus, HTC Evo 3D... or?	Unsinkable II	Canon, Nikon, Sony, and Other Camera Brands	7	06-23-2012 09:36 PM

10-10-2017, 03:30 AM	#2
D1N0 Pentaxian Join Date: May 2012 Location: --- Photos: Gallery Posts: 6,802	Wouldn't the PH-RBM 67mm work? It is the Hood for the DA 17-70 F4. Used Pentax Lens Hood PH-RBM67 For Pentax (17-70mm) \| eBay

10-10-2017, 04:32 AM	#3
Snappertim Forum Member Join Date: Jul 2014 Posts: 88	The lens hood for the old FA-J 18-35 is identical ( I have both lens and hoods and I can see no difference) and available used from many sources code PH-RBB67, code for the 24-90 3.5-4.5 is PH-RBE67. Regards Tim

10-10-2017, 12:51 PM	#4
leekil Pentaxian Join Date: May 2016 Photos: Albums Posts: 2,003	In the lens database, the 18-35 hood is listed as PH-RBL 67, which is the one that I have on mine. It is slightly shallower than the PH-RBE 67, which makes sense, since the focal length is wider.

10-10-2017, 10:46 PM	#5
rrstuff Veteran Member Join Date: Sep 2013 Location: Pasadena, CA Photos: Albums Posts: 1,126	3D printing will not give you the same quality, especially one that is cheaper than buying a hood from ebay, or a third party manufacturer, e.g. JJC.

10-11-2017, 12:20 AM	#6
lepiallou Senior Member Join Date: Mar 2011 Posts: 135 Original Poster	Thanks D1N0, Snappertim and leekil. I have the PH-RBM and tried on the FA 24-90 . It doesn't show any vignetting, however it is not the one designed for the lens, which I would higlhy prefer. rrstuff: I didn't find anything below $50 for the PH-RBE67. 3D printing service I found would be much less than that and I would have a sun-hood designed for lens. Hence my original question.