Pentax LX Damaging Winder Attachments?

butangmucat · 12-06-2018, 12:41 PM

Hello,

I am having some issues with my Pentax LX and winders. My first winder was from a Japanese seller and it doesn't fire after being attached to the camera. It's currently in the process of being returned. I got my second one from KEH, and when I loaded batteries into it and have it turned on, the motor spins freely with no problems. I attached to the camera and it correctly advanced one frame and cocked the shutter. However, when I press the shutter button, the camera did not fire. When I took the winder off and set the switch to on position, the motor no longer turns and the red LED does not light any more. My LX was recently serviced by Advance Camera in Oregon. Could it be an wiring error that is destroying motor attachments that are attached to the camera?

Sincerely

通过我的 moto x4 上的 Tapatalk发言

**stevebrot** · 12-06-2018, 01:55 PM

Do you have the manual for both the LX and the Winder LX? I don't own either, but experience with other Pentax winders has given me respect for the manuals when working with this type of device.

Pentax Manuals | Accessories

For example, according to the manual, the LED flickers when the take-up spool is rotated and again when the shutter is released. It shines steady at end of roll. It will also shine continuously if the batteries are low.

Given that last point, how are the batteries?

Steve

butangmucat · 12-06-2018, 02:10 PM

Originally posted by stevebrot

Do you have the manual for both the LX and the Winder LX? I don't own either, but experience with other Pentax winders has given me respect for the manuals when working with this type of device.

Pentax Manuals | Accessories

For example, according to the manual, the LED flickers when the take-up spool is rotated and again when the shutter is released. It shines steady at end of roll. It will also shine continuously if the batteries are low.

Given that last point, how are the batteries?

Steve

I've tried 3 sets of alkaline batteries and 2 sets of NiMH batteries, both with no luck. The batteries were working with my ME Super and Winder ME II.

Actually I recalled what happened the first time I tried to fire the camera, and it's pretty alarming:
- Shutter got triggered
- The aperture stopped down
- However the mirror did not raise
- Moving into MLU causes the shutter to fire
- The motor drive seems to be dead after that - no LED flicker, no motor movement etc.

---------- Post added 12-06-18 at 02:36 PM ----------

Have written to both KEH and Advance Camera who serviced my LX recently. I'll see if they have any ideas.

**stevebrot** · 12-06-2018, 02:59 PM

Originally posted by butangmucat

Actually I recalled what happened the first time I tried to fire the camera, and it's pretty alarming:
- Shutter got triggered
- The aperture stopped down
- However the mirror did not raise
- Moving into MLU causes the shutter to fire
- The motor drive seems to be dead after that - no LED flicker, no motor movement etc.

Does the camera still work after all that?

Steve

butangmucat · 12-06-2018, 03:00 PM

Originally posted by stevebrot

Does the camera still work after all that?

Steve

The camera is still going strong. But the motor drive seems to be bricked.

通过我的 moto x4 上的 Tapatalk发言

**felixkh** · 12-08-2018, 03:24 AM

Could be the contact from the LX or the winder has faults. Can it be returned to Keh?

12-06-2018, 12:41 PM	#1
butangmucat Veteran Member Join Date: Jul 2016 Posts: 709	Pentax LX Damaging Winder Attachments? Hello, I am having some issues with my Pentax LX and winders. My first winder was from a Japanese seller and it doesn't fire after being attached to the camera. It's currently in the process of being returned. I got my second one from KEH, and when I loaded batteries into it and have it turned on, the motor spins freely with no problems. I attached to the camera and it correctly advanced one frame and cocked the shutter. However, when I press the shutter button, the camera did not fire. When I took the winder off and set the switch to on position, the motor no longer turns and the red LED does not light any more. My LX was recently serviced by Advance Camera in Oregon. Could it be an wiring error that is destroying motor attachments that are attached to the camera? Sincerely 通过我的 moto x4 上的 Tapatalk发言

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PF Black Friday Special - Unlimited Attachments, PM Attachments, and Pentax eBook!	Adam	Pentax Price Watch	55	12-04-2015 03:04 PM
Am I damaging the new K20?	FHPhotographer	Pentax DSLR Discussion	11	08-30-2009 05:54 PM
Can I use this old flash on my camera without damaging it?	vmax84	Flashes, Lighting, and Studio	6	01-13-2009 01:36 AM

12-06-2018, 01:55 PM	#2
stevebrot Otis Memorial Pentaxian Join Date: Mar 2007 Location: Vancouver (USA) Photos: Gallery \| Albums Posts: 42,007	Do you have the manual for both the LX and the Winder LX? I don't own either, but experience with other Pentax winders has given me respect for the manuals when working with this type of device. Pentax Manuals \| Accessories For example, according to the manual, the LED flickers when the take-up spool is rotated and again when the shutter is released. It shines steady at end of roll. It will also shine continuously if the batteries are low. Given that last point, how are the batteries? Steve

12-06-2018, 02:10 PM	#3
butangmucat Veteran Member Join Date: Jul 2016 Posts: 709 Original Poster	Originally posted by stevebrot Do you have the manual for both the LX and the Winder LX? I don't own either, but experience with other Pentax winders has given me respect for the manuals when working with this type of device. Pentax Manuals \| Accessories For example, according to the manual, the LED flickers when the take-up spool is rotated and again when the shutter is released. It shines steady at end of roll. It will also shine continuously if the batteries are low. Given that last point, how are the batteries? Steve I've tried 3 sets of alkaline batteries and 2 sets of NiMH batteries, both with no luck. The batteries were working with my ME Super and Winder ME II. Actually I recalled what happened the first time I tried to fire the camera, and it's pretty alarming: - Shutter got triggered - The aperture stopped down - However the mirror did not raise - Moving into MLU causes the shutter to fire - The motor drive seems to be dead after that - no LED flicker, no motor movement etc. ---------- Post added 12-06-18 at 02:36 PM ---------- Have written to both KEH and Advance Camera who serviced my LX recently. I'll see if they have any ideas.

12-06-2018, 02:59 PM	#4
stevebrot Otis Memorial Pentaxian Join Date: Mar 2007 Location: Vancouver (USA) Photos: Gallery \| Albums Posts: 42,007	Originally posted by butangmucat Actually I recalled what happened the first time I tried to fire the camera, and it's pretty alarming: - Shutter got triggered - The aperture stopped down - However the mirror did not raise - Moving into MLU causes the shutter to fire - The motor drive seems to be dead after that - no LED flicker, no motor movement etc. Does the camera still work after all that? Steve

12-06-2018, 03:00 PM	#5
butangmucat Veteran Member Join Date: Jul 2016 Posts: 709 Original Poster	Originally posted by stevebrot Does the camera still work after all that? Steve The camera is still going strong. But the motor drive seems to be bricked. 通过我的 moto x4 上的 Tapatalk发言

12-08-2018, 03:24 AM	#6
felixkh Site Supporter Join Date: Nov 2008 Location: Singapore Photos: Gallery Posts: 1,201	Could be the contact from the LX or the winder has faults. Can it be returned to Keh?

Thread Tools	Search this Thread
	Search this Thread: Advanced Search