Winder for MX = ME?

noel · 11-23-2008, 04:59 AM

Is the Winder for Pentax MX , the same as ME? Inter-usable?

Been searching around, but seems that there are more Winder-MEs around as compared to those for MX.

THanks all in adv

Andres · 11-23-2008, 06:18 AM

No Sir!

Far as I know they're different, don't ask me which are those differences but...

**monochrome** · 11-23-2008, 06:22 AM

Originally posted by noel

Is the Winder for Pentax MX , the same as ME? Inter-usable?

Been searching around, but seems that there are more Winder-MEs around as compared to those for MX.

THanks all in adv

The Winder MX differs from the Winder ME and Winder MEII.

Pentax Winders and Motor Drives

Ratmagiclady · 11-23-2008, 12:37 PM

It happens I just found out about this, (happen to want for a little film backup for a Pentax digital, and I just kind of like those winders) it's due to a slight difference in the shape of the body between the MX and ME's.

ChrisPlatt · 11-23-2008, 12:49 PM

If you find a working Winder MX make sure the screw fastener for the AA battery holder isn't stripped, a common problem.

Chris

**monochrome** · 11-25-2008, 06:28 PM

Originally posted by ChrisPlatt

If you find a working Winder MX make sure the screw fastener for the AA battery holder isn't stripped, a common problem.

Chris

Also note that the foam lining at the end of the battery chamber decays in much the same way as the foam on film doors and mirror bumpers - easy to remove, though.

CSoars · 11-25-2008, 07:27 PM

My winder screw actually sheared off in the flimsy door, which had a crack when it arrived from an ebay seller. With some creative dis-and-re-assembly, i installed some lithium AA's, fastened the door with a chopped down bolt, and screwed the top plate on. 2 of the original screws are in a container until I can find a more permanent solution, but the whole thing holds up quite well.

If the batteries die, I have to unbolt the top plate to get at the bolt head holding the door shut.

The pressure on that little door is quite strong for the plastic hardware they use.

séamuis · 11-26-2008, 05:49 AM

no they are most certainly different. if you need a winder MX I have a late model (more plastic) version I could sell you. perfect working order, cosmetically excellent. PM if you are interested. for future reference, nothing that I am aware of is interchangeable between the MX and any of the other M series cameras. the 'M' is the only thing the MX shared with th rest. it was built on older (in most ways) technology than the rest of the series and a completely different chassis.

11-23-2008, 04:59 AM	#1
noel Forum Member Join Date: Nov 2008 Location: Singapore Posts: 89	Winder for MX = ME? Is the Winder for Pentax MX , the same as ME? Inter-usable? Been searching around, but seems that there are more Winder-MEs around as compared to those for MX. THanks all in adv

11-25-2008, 06:28 PM	#6
monochrome Loyal Site Supporter Join Date: Mar 2008 Location: Working From Home Photos: Gallery \| Albums Posts: 26,276	Originally posted by ChrisPlatt If you find a working Winder MX make sure the screw fastener for the AA battery holder isn't stripped, a common problem. Chris Also note that the foam lining at the end of the battery chamber decays in much the same way as the foam on film doors and mirror bumpers - easy to remove, though. Last edited by monochrome; 11-25-2008 at 08:14 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
winder me problem	johnk	Film SLRs and Compact Film Cameras	2	04-03-2010 10:05 AM
Correct Winder for P5	scimitar12	Film SLRs and Compact Film Cameras	1	05-19-2009 01:05 PM
Those of you with an LX & Winder...	CSoars	Film SLRs and Compact Film Cameras	6	02-13-2009 10:40 AM
For Sale - Sold: Winder ME II	Rykoh	Sold Items	2	10-11-2008 01:06 PM
inconsistent winder in zx-10	Sluggo	Film SLRs and Compact Film Cameras	16	10-03-2008 04:09 AM

11-23-2008, 06:18 AM	#2
Andres Senior Member Join Date: Jul 2008 Location: Buenos Aires Photos: Albums Posts: 240	No Sir! Far as I know they're different, don't ask me which are those differences but...

11-23-2008, 06:22 AM	#3
monochrome Loyal Site Supporter Join Date: Mar 2008 Location: Working From Home Photos: Gallery \| Albums Posts: 26,276	Originally posted by noel Is the Winder for Pentax MX , the same as ME? Inter-usable? Been searching around, but seems that there are more Winder-MEs around as compared to those for MX. THanks all in adv The Winder MX differs from the Winder ME and Winder MEII. Pentax Winders and Motor Drives

11-23-2008, 12:37 PM	#4
Ratmagiclady Veteran Member Join Date: Nov 2008 Location: GA Photos: Gallery \| Albums Posts: 13,563	It happens I just found out about this, (happen to want for a little film backup for a Pentax digital, and I just kind of like those winders) it's due to a slight difference in the shape of the body between the MX and ME's.

11-23-2008, 12:49 PM	#5
ChrisPlatt Pentaxian Join Date: Nov 2007 Location: Rockaway Beach NYC Posts: 7,358	If you find a working Winder MX make sure the screw fastener for the AA battery holder isn't stripped, a common problem. Chris

11-25-2008, 07:27 PM	#7
CSoars Inactive Account Join Date: May 2008 Location: Edmonton, Canada Posts: 322	My winder screw actually sheared off in the flimsy door, which had a crack when it arrived from an ebay seller. With some creative dis-and-re-assembly, i installed some lithium AA's, fastened the door with a chopped down bolt, and screwed the top plate on. 2 of the original screws are in a container until I can find a more permanent solution, but the whole thing holds up quite well. If the batteries die, I have to unbolt the top plate to get at the bolt head holding the door shut. The pressure on that little door is quite strong for the plastic hardware they use.

11-26-2008, 05:49 AM	#8
séamuis Banned Join Date: Oct 2007 Location: Savannah, U.S./Baguio City, P.H. Posts: 5,979	no they are most certainly different. if you need a winder MX I have a late model (more plastic) version I could sell you. perfect working order, cosmetically excellent. PM if you are interested. for future reference, nothing that I am aware of is interchangeable between the MX and any of the other M series cameras. the 'M' is the only thing the MX shared with th rest. it was built on older (in most ways) technology than the rest of the series and a completely different chassis.

Thread Tools	Search this Thread
	Search this Thread: Advanced Search