Showing Guestbook Entries 1 to 2 of 2
-
Hi Wayne,
have you turned on the groups on the RF60 and set them to non-zero power levels?
Are you using a shutter speed that does not exceed the sync-speed of your camera? If you are using a Pentax camera, it won't trigger the RF60, unless you don't exceed the sync-speed. Is the RF60 firing but the V6's are not?
Are you leaving enough space (1m should suffice) between the RF60 and the V6 receivers? Too close a distance will overwhelm the radio receivers and they won't work.
If you still don't get any response from the V6 units, it might be a firmware version issue. I believe A06 on the RF60 and V61.A.001 on the V6 should work together. You are using V6 units, not V6 II units, correct?
Perhaps post your firmware versions here, in case you cannot resolve the issue.
You may also want to PM me, as I'm not checking this page on a regular basis. If I receive a PM, I'll get an email notification.
-
Hey Wayne,
Sorry I missed your message!
I hope you both enjoyed HK.
All the Best,
Fred
Gallery Photos 
