Forum: Post Your Photos!
04-27-2012, 09:57 AM
|
|
Shuttle Enterprise on it's final flight to JFK airport passing the George Washinton Bridge.
|
Forum: Troubleshooting and Beginner Help
08-30-2011, 04:48 AM
|
|
I believe that you are correct in estimating that you will get over 2000 pictures You should notice that as you snap pics the counter will remain at 999. The limitation is just the 3 digit counter not the actual space on the card.
DanM
|
Forum: Pentax Price Watch
05-30-2011, 06:31 PM
|
|
|
Forum: Troubleshooting and Beginner Help
09-22-2010, 03:30 AM
|
|
Here is a copy of the directions I followed when updating my K100D
Updating Procedure
1. Provide a formated SD memory card for the update software (with at least 8MB
of available memory space).
The downloaded file is self-extracting.
The following files are extracted.
readme.txt : this document
fwdc156b.bin : Firmware
Copy the above Firmware file [fwdc156b.bin] to the root directory in
the SD card.
If your computer does not have a card slot, you can copy the firmware
update file by inserting the SD card into your camera and then connecting
the camera directly to your computer.
2. If the camera power is on, turn it off.
3. Insert the update SD card (prepared in step 1) into the camera.
4. Connect the AC adapter to the camera.
If you are using a rechargeable battery, make sure that it is fully
charged, and if you are using batteries that are not rechargeable,
make sure that they are fresh batteries.
5. Turn the camera power on while pressing the MENU button.
6. "NOW LOADING" appears in the LCD monitor, and will change to the
"PROGRAM UPDATE". At the bottom of the LCD monitor,
CURRENT VERSION 1.00/1.01
UPDATE VERSION 1.02
will be displayed.
7. Press the four-way controller to select "YES" and press the "OK" button.
8. "UPDATING" appears on the LCD monitor and updating starts.
Please do not under any circumstances switch off the power before the
update is completed.
It will take approximately 90 seconds to complete update.
9. When update is completed, the "COMPLETE" will be displayed at the left
bottom of the LCD monitor, then turn the camera off.
10. Remove the update SD card from the camera.
11. To check the Firmware version in your camera, turn the camera on while
pressing the MENU button.
Check that the version displayed in the LCD monitor is 1.02.
The camera automatically starts up after about 5 seconds.
(Caution)
When updating is finished, the update SD card still contains the
Firmware file.
If you want to use this card to take pictures, delete the Firmware file
first.
Dan M
|
Forum: Photographic Technique
04-28-2010, 09:22 AM
|
|
Wow great suggestions all! The park refrenced for pics of the George Washington Bridge is Fort Tryon Park at the north end of Fort Washington Avenue in upper Manhattan. If you are going to be primarly in midtown Manhattan you might try the 79th Street boat basin for pics of the GW and Hudson River. And for Grenwich Village add Washington Square Park to your list.
|
Forum: Sold Items
04-05-2010, 05:25 AM
|
|
|
Forum: Sold Items
04-02-2010, 07:36 PM
|
|
|
Forum: Sold Items
03-31-2010, 05:34 AM
|
|
PM Sent follow up with interest
|