Forum: Flashes, Lighting, and Studio
02-08-2018, 01:58 AM
|
|
Hello,
You need to enter 'HSS territory' with your AD600M.
I can give you a quick table with the options that allow to fire several Godox flashes above 1/180. There are several threads about how to fire Godox flashes with a Pentax camera & HSS. Also, I remember that there are several forum members that have exactly your equipment, that is AD600M & K1. My tests were done using K5/K3 II and AD200/AD360/V850. I have a couple of threads testing several combinations of Godox triggers on my AD200.
First, you need the Cactus V6 II with HSS firmware.
Second, you need to stack a Godox trigger on top of your Cactus.
Finally, it's possible that you need to disable wireless mode on your AD600M, and put a XTR16/FTR16 receiver on the USB port.
Also, you'll need to enable HSS manually on your AD600M.
Please read my last post about the new XProC Godox trigger, because this game has changed now.
So, on your camera side you can have:
K1+V6 II + FT16/XT16/XT32C triggers
On your flash side:
FT16R/XT16R, wireless mode disabled, HSS enabled manually
Notice that I not tested above combinations with a K1 or AD600M, but with very similar equipment.
If you got the new XProC, I think you'll get the best combination for HSS at present:
K1 + V6 II + XProC on your side
Just your AD600M on the other, wireless enabled.
XProC will (probably) enable/disable HSS automatically. Only tested on a AD200, but my guess is that it will work with all the modern 'X' Godox flashes.
More combinations are possible...
Regards.
|