Forgot Password
Pentax Camera Forums Home
 

Showing results 1 to 25 of 300 Search:
Forum: Pentax Film SLR Discussion 12-10-2012, 10:55 AM  
Taking my ZX7 out for a spin
Posted By violini
Replies: 9
Views: 1,392
I picked up 5 packages of Walgreen 200 last year. I wonder who made these films (Fujifilm?). I also have a MZ-7 which I replaced the mirror motor. I use MZ-5N more often because I like its pentaprism viewfinder and spot metering.
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 11-24-2012, 07:41 PM  
Post Your Fujifilm X100/X10 Pictures
Posted By violini
Replies: 4,931
Views: 374,510
The mountain scenery near Taipei and my ancestors old house in southern Taiwan. The 2nd picture is a bit fuzzy probably due to unsteady hand. Photos taken with X-10.
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 11-23-2012, 05:34 PM  
Post Your Fujifilm X100/X10 Pictures
Posted By violini
Replies: 4,931
Views: 374,510
It was not my intention to bash Fuji camera. I feel that X-10 is not for me. For portability, my iPhone is just as good and I am not willing to spend more money for X-100. All in all, in my experience, any of Olympus and Panasonic micro four thirds is a lot more versatile than X-10. I am now selling it in the local market, after two weeks if it is not sold, I will list it in this site.
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 11-23-2012, 04:18 PM  
Post Your Fujifilm X100/X10 Pictures
Posted By violini
Replies: 4,931
Views: 374,510
After reading these threads, I was misled to buy a X-10. I only took 8 pictures and was so disappointed by the results. The camera has been in the drawer for 5 months now, I think I should get rid it. The culprit is nothing else but that miniscule sensor.
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 02-21-2012, 08:20 AM  
Post Your Fujifilm X100/X10 Pictures
Posted By violini
Replies: 4,931
Views: 374,510
It reminds me the laughing budda.
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 02-19-2012, 06:04 PM  
New Toy
Posted By violini
Replies: 17
Views: 1,702
Sensational! The Genie is finally out. Be patient, Rupert, we are not starving.
Forum: Pentax K-5 02-19-2012, 05:41 PM  
Just brought home my K5!
Posted By violini
Replies: 5
Views: 874
I can't see the difference. The 2nd picture has better contrast in the dark area and sharper to me. I decide to skip K-5 and wait for whatever the replacement or X-Pro1.
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 02-18-2012, 06:24 PM  
Fujifilm X10 firmware: Appears not to fix 'white orbs'
Posted By violini
Replies: 50
Views: 9,995
I remember that some one mentioned here that the white orb will appear only under certain processing settings. The problem maybe also due to improper focusing under low light. I saw photos shot with Canon 7D also have white orbs. I for one hate bokeh. Those of you who love it should consider white orbs: special beautiful bokeh.
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 02-18-2012, 06:15 PM  
Fujifilm X10 firmware: Appears not to fix 'white orbs'
Posted By violini
Replies: 50
Views: 9,995
I have not been able to get these white orbs either. I can see the so-called white orbs have sharp circular edges. In two weeks time, I will be in Beijing and Taipei; I will try to shoot many night scenes to see if I can get those white orbs.
Forum: Pentax Film SLR Discussion 02-18-2012, 05:31 PM  
MZ-5n problem - not the usual mirror thing...
Posted By violini
Replies: 9
Views: 1,858
I would load a roll of 24 and test it. The film is advanced by counting the number of holes along the edge of the film, each frame is 8 holes in width. Check the teeth on the lower part of the winding spool and the gear on the left side. Also clean the battery door (+) to the edge contact. I only use Duracell and Energizer brands, Those 1-dollar batteries do not work on my camera, they are a bit too long making it difficult to close the battery door and die really fast. I ran through over 200 rolls of films in one of my MZ-6 and have not encountered any problem yet.
Forum: Pentax Film SLR Discussion 02-16-2012, 08:33 AM  
Testing my "new" ZX-10
Posted By violini
Replies: 4
Views: 1,194
Beautiful pictures! Nowadays people talked so much about FF DSLR. This ZX-10 is one of the indigenous full frame camera. Even though it is plasticky, it's amazingly light and a lot easier to operate than those metal behemoth.
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 02-15-2012, 05:07 PM  
Post Your Fujifilm X100/X10 Pictures
Posted By violini
Replies: 4,931
Views: 374,510
X10 seems to be able to capture the bird in flight quite well. I've seen two photos shot by the same person:
Fujifilm x10 sample | Flickr - Photo Sharing!
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 02-13-2012, 02:51 PM  
Lytro
Posted By violini
Replies: 16
Views: 1,659
I just don't see this geometrical optics will be any better than what has been accomplished. If some one would apply Richard Feynman's QED in camera design, that would be a step forward.
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 02-13-2012, 09:58 AM  
Post Your Fujifilm X100/X10 Pictures
Posted By violini
Replies: 4,931
Views: 374,510
Rupert, do you get snow in DFW area? I am going to Asia in March and will bring my x10 with me.
Forum: Pentax Film SLR Discussion 02-12-2012, 09:38 AM  
ZX-5n Shutter Issue
Posted By violini
Replies: 3
Views: 895
When the bottom cover is removed, you can see the manufacturing date stamped on the metal plate. All the MZ/ZX series from 2002 have metal gear on the mirror motor shaft. Also the company changed the name to Pentax Corporation (from Asahi Opt.Co. Ltd.) in 2002. If your camera is a pre-2002 one, I would guess that whoever replaced the mirror motor didn't assemble the camera correctly. Please refer to the "mirror motor" threads " MZ5n mirror blocked, service manual?" post #62. There is a plastic arm (behind the yellow gear) extends from the gear box to the shutter block to trigger the shutter to fire. When the yellow gear is removed, you'll see two plastic levers, the one on the right is for setting the lens diaphragm, the one on the left which is extending down, is shutter charge lever. The two levers are connected by a very fine coil spring. Also mentioned in that post, the yellow and green gears are synchronized by mating the holes at the rims. The gear box cycle runs like this: when the shutter button is pressed, the mirror flips up, the aperture is set, the shutter fires, the mirror returns to 45 degree angle, the diaphragm opens up, the power is off. If it is any where in the middle of the cycle, the power is always on, which is not controlled by the external power switch. Therefore, I would suggest that you check the synchronization and the two levers behind the yellow gear.
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 02-09-2012, 11:34 AM  
New Cameras....What are Your Plans?
Posted By violini
Replies: 84
Views: 5,105
I want Fuji x-pro1 when it is well reviewed. Right now I am happy with x-10, K-x, K-7, and the full-frame film cameras.
Forum: Pentax Film SLR Discussion 02-07-2012, 06:11 PM  
Travelling with Film
Posted By violini
Replies: 12
Views: 1,197
I am going to Asia in March. I will bring some Fuji superia 400 films. Would this film be damaged by the security x-ray?
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 02-06-2012, 03:57 PM  
Fujifilm says X-Pro1 will set you back around $2300 !
Posted By violini
Replies: 174
Views: 9,604
No, nothing wrong with plastics. Nowadays all eye glasses are made of plastics. It's much cheaper to manufacture. Since it is softer than glass, one has to be very careful to clean it. Also the coatings is easier to wipe off.
Forum: Non-Pentax Cameras: Canon, Nikon, etc. 02-06-2012, 09:30 AM  
Fujifilm says X-Pro1 will set you back around $2300 !
Posted By violini
Replies: 174
Views: 9,604
Fuji lens elements are made of glass not plastics. The viewfinder of my x10 has glass elements and prism. In contrast, all the eyepieces of my Pentax autofocus film cameras (except maybe MZ-S) are made of plastics. The manufacturing cost of glass elements is much higher. I plan to sell most of my Pentax gear when X-Pro1 is available and well reviewed. I want a camera with short registration distance.
Forum: Pentax Film SLR Discussion 02-04-2012, 05:45 PM  
MZ-5n problem - not the usual mirror thing...
Posted By violini
Replies: 9
Views: 1,858
>>if someone could point out where is the film advance motor (and it's gear) in the camera.>>

When you open the back door, you'll see the film take-up spool on the right-hand side. The motor is inside the spool. All the gears for advance and rewind of film are located at the bottom of the camera. Remove the bottom cover (remember the screw on the left side of battery door is shorter). Follow "the mirror motor" thread to remove the bottom metal plate and front covers. (Use a marking pen to mark the holes on the metal plate before removing the screws, the 2 screws near the lens mount are different.). In case you need to replace some of the film transport gears, I'll send them to you for free. Your problem may be due to the batteries are getting low.
Forum: Pentax K-01 02-02-2012, 05:37 PM  
Evf/ovf?
Posted By violini
Replies: 17
Views: 5,192
I am sure some one will make a cover or shade for the LCD to enable the image visible under bright daylight.
Forum: Pentax Film SLR Discussion 01-30-2012, 07:06 PM  
Pentax ME not working??
Posted By violini
Replies: 4
Views: 975
I would suggest that you clean the battery contact; it looks like the contact (+) and the door (-) are made of stainless steel. Use only the silver oxide batteries. The batteries in my ME and HP calculator are about 25 years and are still good and no leakage.

Pull rewind lever out about 30 degree to turn the power on, remove lens cap and press shutter button half way, you will see in VF a red dot to indicate the shutter time.
Forum: Pentax Film SLR Discussion 01-30-2012, 09:27 AM  
I Screwed up Pretty Hard
Posted By violini
Replies: 87
Views: 7,948
Since i only used "auto" cameras such as MZ-5N and 6, I've never had the experience of "rite of passage". These "smart" cameras would avoid making such dumb mistakes. If the film is not proper loaded, it will signal on the LCD. At the end of the film, it will automatically rewind. MZ-6 can be programmed to leave 1" outside after rewind. I often take out the film when half roll is exposed, cut and develop it and put the remaining film back to the camera.
Forum: Pentax Film SLR Discussion 01-28-2012, 10:14 AM  
external flash for mz-6
Posted By violini
Replies: 3
Views: 670
360fgz.
Forum: Troubleshooting and Beginner Help 01-22-2012, 09:36 PM  
ZX-5N mirror stuck
Posted By violini
Replies: 4
Views: 890
Go to "Pentax Film SLR Discussion", there is one thread dedicated to this problem.
Search took 0.01 seconds | Showing results 1 to 25 of 300

 
Forum Jump


All times are GMT -7. The time now is 04:06 AM. | See also: NikonForums.com, CanonForums.com part of our network of photo forums!
  • Red (Default)
  • Green
  • Gray
  • Dark
  • Dark Yellow
  • Dark Blue
  • Old Red
  • Old Green
  • Old Gray
  • Dial-Up Style
Hello! It's great to see you back on the forum! Have you considered joining the community?
register
Creating a FREE ACCOUNT takes under a minute, removes ads, and lets you post! [Dismiss]
Top