Forgot Password
Pentax Camera Forums Home
 

Showing results 1 to 5 of 5 Search: Liked Posts
Forum: Photo Critique 03-06-2011, 10:05 PM  
Landscape Snowshowers
Posted By scottk13
Replies: 4
Views: 2,081
Well, I think the brown, white and gray make for a great photo!

I would crop off about 75% of the snow in the foreground. Then my eye flows easily through the irrigation equipment to the houses and then back to the mountains and the sky. The sky looks a bit hot to me in the upper right hand quadrant. It immediately draws my attention away from the rest of the photo. An ND grad would help here. If that is toned down a bit I think you would have the perfect winter mood. I have to drive miles to see a scene like this!
Forum: Photo Critique 03-06-2011, 01:27 PM  
Landscape Snowshowers
Posted By Ash
Replies: 4
Views: 2,081
I agree with the above - the negative space below the fence line doesn't quite complement the image as is. The sky here is also a little bland but the mountainscape interesting and nicely lit. The same scene captured up a little closer to the fence line and with a wider angle would be great on a day with more interesting cloud formations.
Forum: Photo Critique 03-06-2011, 01:14 PM  
Landscape Snowshowers
Posted By ASa
Replies: 4
Views: 2,081
It's a nice landscape with pure and rich colors but I'd like the picture to be aligned with the fence on the foreground. Also I would for some reason like to drop a bit of the bottom part away. Now you have quite a lot of sky and quite a lot of foreground land, and I keep thinking which is the part you want to show.
Overall it's a good capture of a constantly changing landscape.
Forum: Photo Critique 02-13-2011, 09:11 AM  
Landscape Red Sky At Night
Posted By Peter Zack
Replies: 6
Views: 2,284
I had a look at the EXIF data and I would suggest a different choice next time. You were at ISO800, that's fine, in fact with a K-x you could have gone to 1600 safely. Aperture was f14 and shutter speed at 1/125th. I would have opened up to maybe f8 and increased the shutter speed. That would have helped with the wind and ensuring the far horizon line was frozen better.

Overall nice effort given the conditions.
Forum: Pentax Lens Articles 08-12-2010, 04:24 AM  
Sticky: How to use/meter Manual & M42 Lenses on all Pentax DSLRs (K-1, K-3, K-5, K-30, etc)
Posted By Adam
Replies: 325
Views: 310,599
Many Pentax DSLR owners want to use M42 screwmount (Takumar) lenses, or M or K manual lenses, on their cameras because of the low cost and relatively high image quality of these lenses.


If you're wondering whether or not these lenses can be used with Pentax DSLRs (or the K-01), then the answer is yes! Pentax as well as third-party manual and screwmount lenses can easily be mounted on any Pentax DSLR (such as the K-1 series, KP, K-3 series, K-70, K-S2, K-S1, K-50, K-500, K-30, K-5 series, K-r, K-x, K-7, K10D, K100D, K200D, *ist D, etc.) Just follow this guide!



Modern Pentax DSLRs use the Pentax "K-mount", which employs a bayonet and therefore differs significantly from the M42 screw mount. The older manual M and K (SMC Pentax-M, SMC Pentax) lenses actually use the bayonet, so they will not need an adapter - you can skip straight to the lower portion of this article (starting at "Important!") for information on how to meter with those lenses. Screwmount lenses usually have "Takumar" in their names, and in order to mount screwmount lenses on your k-mount body, you'll need a Pentax k to m42 adapter. Pictured above is the genuine Pentax adapter, which is ideally the one you want to get. Similar third-party adapters are also available. Caution: Many third-party adapters, such as this one, have a protruding flange which will prevent you from focusing all the way to infinity. If you want to buy a third-party adapter (they're generally cheaper), make sure that they don't have this flange. Here's an example of a good third-party adapter.

Once you have your adapter, the next step is to install it on your camera (it can easily be put on and removed on-the-fly). Check out the m42 to k adapter manual.


After you've installed the adapter, you'll want to mount the lens. This is done by screwing it into the camera until the lens feels firmly attached. The focusing window and lens ring should line up with the camera just like any other lens. Now that your lens is mounted, let's talk about how to take photos with it.

Important! The hard part is to get the camera to actually fire when a manual lens is mounted. In order to accomplish this, enter your camera's custom function menu, select the "Using Aperture Ring" setting (usually at the end of the menu, #21 on the K-7, #27 on the K-5, #27 on the K-3, #26 on the K-1), and set it to 2 (allowed). Once you do this, the shutter will at least fire, as it wouldn't have with this setting disabled (you would simply have seen an F-- indication on the top LCD/info screen). The setting description should read: 'Shutter will release when aperture ring is not set to the "A" position' when "allowed" is selected. Also note that the mount on the lens must be conductive for electrical current so that it shorts the electrical contacts on the camera body. All Pentax manufactured lenses have a conductive mount, but some third party lenses do not in which case the area of the mount touching the contacts must be sanded down.

K-30, K-50, K-500, K-70, K-S1, K-S2 and K-01 users: make sure you also set your green button "action in M/TAv Mode" to Tv SHIFT. This is found under the button customization menu (page 3 of the main menu) on the K-01 or as a custom function on the K-30, K-50 and K-500. On the K-S2 and K-70, look under the e-dial programming sub-menu under button customization in the record menu.

Finally, ensure that auto ISO is disabled.

At startup, if your camera asks you for the focal length, enter the actual focal length as labeled on the lens. This will ensure optimal Shake Reduction performance. For zooms, you can use the lower end of the zoom range (this ensures that there will be no over-compensation), or the focal length that you shoot at most often.

Now, let's discuss metering. Since manual lenses don't feed aperture data to the camera, the only way for the camera to check how much light is being passed through the lens is to measure the light while the lens is stopped down. Follow this procedure to properly meter with a screwmount, M, or K lens:

___0. Ensure that the "Using Aperture Ring" custom function is set to "2 (allowed)" (K-30/50/500/01 users must also ensure that the green button is configured to Tv Shift in M/TAv Mode) as described above
  1. Set your camera to M mode using the mode dial (your camera won't fire in other modes*)

  2. Compose and focus your image.

  3. Using the aperture ring (the ring at the very back of your lens; it will have numbers such as 2.8, 4, 5.6, 8 written on it), select your desired aperture setting. Note that the smaller the aperture number is, the more light passes through the lens, and the blurrier the out of focus areas of your photograph will be (and vice-versa). Note your lens will not stop down until step 5.

  4. [Screwmount lenses only] Switch the diaphragm clutch on your lens to "Manual" (you can leave it on Auto when composing and focusing if you don't want a dark viewfinder).

  5. Measure the light by either pressing the "Green Button" (older bodies may use the Av button), or pushing your power button to DOF preview mode (only available on high-end bodies). Your camera will automatically set the shutter speed for you.

All that's left now is for you to press the shutter release button to take your photo. Congratulations- you've now learned how to use M42 and M & K manual lenses with Pentax DSLRs!

*Screwmount lenses may also be used in Av mode since they are always stopped down to the aperture you will be shooting at (unlike M&K lenses, which are stopped down only when the shutter is released or when you meter as described above).

Note: if your aperture ring has an "A" on it, instead of doing stop-down metering as per this guide, you'll want to set the ring to "A" and use the camera's scrollweel to adjust the aperture via Av mode.

Click here if you found this article helpful!

Video version:















You Tube



Search took 0.00 seconds | Showing results 1 to 5 of 5

 
Forum Jump


All times are GMT -7. The time now is 09:35 AM. | See also: NikonForums.com, CanonForums.com part of our network of photo forums!
  • Red (Default)
  • Green
  • Gray
  • Dark
  • Dark Yellow
  • Dark Blue
  • Old Red
  • Old Green
  • Old Gray
  • Dial-Up Style
Hello! It's great to see you back on the forum! Have you considered joining the community?
register
Creating a FREE ACCOUNT takes under a minute, removes ads, and lets you post! [Dismiss]
Top